+91-9157487233
𝕏
Rugged ExtractionHigh Pressure 13-25 BarISO 8573-1 Compliant

HOW COMPRESSORS ARE USED IN MINING, QUARRYING & DEEP DRILLING

Rugged skid-mounted and stationary compressor packages engineered for open-cast marble quarries, granite excavation, and deep Down-The-Hole (DTH) blast hole drilling.

Operating Pressure
10.0 – 20.0 Bar
Continuous Plant Main
Air Purity Standard
ISO 8573-1: Class 3.5.3
ISO 8573 Certified
Duty Cycle
100% S1 Rated
24/7/365 Non-Stop
Acoustic Rating
62 – 68 dB(A)
Silent Canopy Enclosure
Engineering Whitepaper & Operational Role

The Critical Role of Compressed Air in Mining, Quarrying & Deep Drilling

In open-cast mining and dimension stone quarries (marble, granite, limestone), high-pressure compressed air is the primary motive force for rock excavation. Large crawler drill rigs utilize Down-The-Hole (DTH) pneumatic percussion hammers (typically 4.5" to 8" hammer sizes) operating at 13 to 20 Bar pressure. The compressed air acts simultaneously as both the hammer driving energy (striking the tungsten button drill bit against solid rock at 1,500 to 2,500 blows per minute) and the flushing medium that sweeps heavy drill cuttings, rock dust, and water chips up and out of deep blast holes (up to 30 meters deep). Without adequate CFM and pressure, drill bits bind and overheat in the hole, causing costly drill string losses.

Energy Efficiency & Plant ROI Insight
Direct 1:1 drive with oversized rotors ensures maximum torque output without belt slip at elevated ambient quarry temperatures.

Key Plant Machinery & Pneumatic Operations Powered:

Down-the-Hole (DTH) pneumatic percussion hammers for blast hole drilling
Granite and marble quarry wire saw tensioning and block pneumatic pushers
Underground mine shaft pneumatic ventilation fans and emergency refuge air
Pneumatic dry-rock drilling rigs and dust suppression water atomizers
Engineered Configuration

Recommended Sarv Jagat Machinery Package

Sarv Jagat SJ RF120 / SJ RF175 13-Bar High Capacity Heavy Skid Series

Turnkey skid-mounted package with multi-stage high-efficiency coalescing filters, dual micro-porous pre-filters, and automatic zero-air-loss moisture drains.

Air End Profile:5:6 Asymmetric Rotor
Motor Efficiency:IE3 / IE4 Ultra-Premium
Cooling Medium:Oversized Heavy-Duty Radiator
PLC Controller:7-Inch Touchscreen SCADA Ready
Pneumatic Flow Architecture

STEP-BY-STEP PROCESS WORKFLOWS IN MINING, QUARRYING & DEEP DRILLING

Detailed examination of where and how compressed air powers each critical stage of the production floor, from raw material handling to final quality testing.

01
Workflow Stage

DTH Blast Hole Percussion Hammer Drilling

Delivers 13-18 Bar air down the drill rod string to power the internal piston hammer and blow pulverized rock dust up the hole annulus.

Typical Pressure:13.0 – 18.0 Bar
Air Quality:ISO 8573-1 Class 3.5.3
02
Workflow Stage

Diamond Wire Saw Pneumatic Tensioning

Maintains constant pneumatic tension on diamond-impregnated wire saw cables cutting through solid granite and marble benches.

Typical Pressure:7.0 – 9.0 Bar
Air Quality:ISO 8573-1 Class 3.4.2
03
Workflow Stage

Stone Block Hydraulic/Pneumatic Pushers

Heavy pneumatic steel airbags and pushers topple 50-ton quarried stone blocks away from the bench face onto quarry transport beds.

Typical Pressure:8.0 – 10.0 Bar
Air Quality:ISO 8573-1 Class 4.4.3
Quality & Compliance Matrix

ISO 8573-1 Air Purity Specification for Mining, Quarrying & Deep Drilling

Plant air must adhere strictly to international purity thresholds to prevent expensive batch rejections, cylinder corrosion, and valve sticking.

Solid Particles Limit
5.0 Micron (Class 3)

Dual high-porosity sub-micron pre-filters eliminate microscopic dust particles, keeping pneumatic solenoids and servo valves operating with zero friction.

Pressure Dew Point (PDP)
+7°C (Class 5)

Guarantees no liquid water condensation inside the air network, preventing line rusting, painting blisters, and ice formation in refrigerated sections.

Residual Oil Aerosol & Vapor
< 2.0 mg/m³ (Class 3)

Multi-stage coalescing filtration and activated carbon towers ensure clean, vapor-free discharge compliant with strictest hygiene standards.

Engineering Superiority

WHY ROTARY SCREW TECHNOLOGY IS ESSENTIAL IN MINING, QUARRYING & DEEP DRILLING

Discover why leading industrial facilities replace legacy reciprocating pistons with Sarv Jagat continuous-duty rotary screw compressors.

01

Engineering Advantage #1

High-pressure 13-Bar to 16-Bar single-stage screw technology provides massive CFM without overheating.

02

Engineering Advantage #2

Heavy-duty skid frame with forklift pockets and lifting lugs allows easy transport across rugged quarry terrain.

03

Engineering Advantage #3

Oversized air intake cyclones protect airend internals against abrasive quartz and granite dust.

Verified Machinery Configurations

RECOMMENDED COMPRESSOR MODELS FOR MINING, QUARRYING & DEEP DRILLING

Click on any model below to view full engineering specifications, CAD dimensions, and air consumption sizing.

High Pressure Variable Speed SJ Screw Air Compressor VFD/VSDSJ RV 120
120 HP 13 Bar SJ VFD Variable Speed Screw Air Compressor

120 HP 13 Bar SJ VFD Variable Speed Screw Air Compressor

Power120 HP
Pressure13 Bar
Flow434 CFM
High Pressure Variable Speed SJ Screw Air Compressor VFD/VSDSJ RV 150
150 HP 13 Bar SJ VFD Variable Speed Screw Air Compressor

150 HP 13 Bar SJ VFD Variable Speed Screw Air Compressor

Power150 HP
Pressure13 Bar
Flow516 CFM
High Pressure Fixed Speed SJ Screw Air CompressorSJ RF 100
100 HP 10 Bar SJ Fixed Speed Screw Air Compressor

100 HP 10 Bar SJ Fixed Speed Screw Air Compressor

Power100 HP
Pressure10 Bar
Flow410 CFM
Plant Engineering Knowledge Base

TECHNICAL FAQS: MINING, QUARRYING & DEEP DRILLING

Frequently encountered questions regarding air purity, pressure stability, and compressor sizing for this sector.

Q1:Why is air pressure more important than CFM for DTH drilling rate?

Penetration rate in hard rock increases almost with the square of operating pressure. Increasing drilling pressure from 10 Bar to 13 Bar typically yields a 40% faster drilling rate, allowing operators to complete more blast holes per shift.

Explore More Manufacturing Applications

Other Industries Powered by Sarv Jagat

View All 18+ Sectors
Global Industrial Air System Engineering

Need Turnkey Engineering for Your Mining, Quarrying & Deep Drilling Facility?

Our engineering team conducts free air audits, calculates pressure-drop curves, and recommends custom dual-voltage (380V/415V/460V, 50/60Hz) packages ready for containerized sea shipment worldwide.

Call
WhatsApp
Products
Get Quote