+91-9157487233
𝕏
Back to Products Catalogue
SJ RF 100⚙️ Fixed Speed Direct Drive
100 HP 10 Bar SJ Fixed Speed Screw Air Compressor
Power: 100 HPDual Voltage (50/60 Hz Global Ready)
✓ ISO 9001:2015 Certified
✓ CE Standard Design
✓ IS 5456 Performance Rating
High Pressure Fixed Speed SJ Screw Air Compressor•Model Code: SJ RF 100

100 HP 10 Bar SJ Fixed Speed Screw Air Compressor

Explore the SJ RF100 100 HP fixed speed screw air compressor delivering 410 CFM at 10 bar. Industrial compressed air solution by Sarv Jagat.

Motor Power100 HP75 kW Electrical
Working Pressure10 Bar145 PSI Rating
Free Air Delivery410 CFM11.61 m³/min
Core Engineering Highlights:
Heavy-duty continuous 24/7 industrial duty electric motor (IE3/IE4 standard)
Precision asymmetric twin-screw rotor profile with SKF heavy-duty bearings
Smart MAM-880 micro-computer controller with automatic load/unload cycling
Low acoustic vibration enclosure with sound-absorbing fire-retardant foam lining
Oversized aluminum bar-plate heat exchanger with thermostatic oil control valve
WhatsApp Engineer
Factory Hotline: +91-9157487233Worldwide Sea-Worthy Packaging
Verified Technical Data Sheet

ENGINEERING SPECIFICATIONS — SJ RF 100

Tested to IS 5456 & ISO 1217 Standard
Specification ParameterCertified Engineering Rating
Motor Power100 HP / 75 kW
Working Pressure (Discharge)10 Bar / 145 PSI / 1 MPa
Free Air Delivery (FAD Capacity) 410 CFM / 11.61 m³/min
Drive TypeFixed Speed (Direct Driven)
Cooling SystemOversized Vacuum-Brazed Aluminum Heat Exchanger
Micro-Controller PLCMAM-880 Intelligent Micro-Computer with RS-485 Modbus
Electrical Grid Compatibility415V ±10% / 3-Phase / 50 Hz (Dual Voltage 50/60 Hz Available)
Operating Sound Level70 ± 2 dB(A) Acoustic Enclosure
Unit Dimensions (L × W × H)2200 x 1400 x 1850 mm
Approx. Net Weight2350 kg
Cooling MethodHigh Efficiency Air Cooled
Voltage & Frequency415V ±10% / 3-Phase / 50 Hz
StageSingle Stage
TypeFixed Speed
TechnologyOil Injected Rotary Screw
DriveDirect Driven
Technical Documentation & Plant Application Guide

PRODUCT OVERVIEW & ENGINEERING GUIDE

Authored by Sarv Jagat Corporation Engineering Team • Official Product Whitepaper

100 HP 10 Bar SJ Fixed Speed Screw Air Compressor – SJ RF100

The SJ RF100 100 HP Fixed Speed Screw Air Compressor is a high-capacity industrial compressed air solution designed for manufacturing facilities and production environments requiring a substantial volume of compressed air at a specified operating pressure of 10 bar.

With a rated motor power of 75 kW (100 HP) and an air delivery capacity of 410 CFM (11.61 m³/min) at 10 bar, the SJ RF100 is positioned for industrial installations where multiple machines, production departments and pneumatic systems draw compressed air from a common supply network.

Part of the Sarv Jagat R Series, the SJ RF100 uses single-stage rotary screw compression technology with a fixed-speed operating arrangement. Its capacity makes it relevant for larger manufacturing operations that need to evaluate a centralised compressed air supply rather than relying on several smaller compressors without coordinated system planning.

The 10 bar pressure rating is an important selection parameter for applications where connected machinery or production processes specifically require this pressure level. The rated airflow of 410 CFM provides the capacity reference for evaluating the compressor against the plant's actual air consumption.

The SJ RF100 can be considered for industrial applications such as large engineering facilities, automotive component manufacturing, metal processing, CNC machining, fabrication plants, industrial automation, packaging production, textile manufacturing and other compressed-air-intensive operations.

For facilities planning a new compressed air installation or upgrading an existing system, the SJ RF100 offers a defined combination of 100 HP motor power, 10 bar pressure rating and 410 CFM rated air delivery.

Sarv Jagat provides industrial air compressor products, compressed air equipment, spare parts and service support for businesses evaluating equipment according to their production and operational requirements.

WHY CHOOSE THIS CAPACITY?

Selecting a 100 HP compressor is a system-capacity decision. Motor power alone does not establish whether a compressor is suitable for a factory. The selection must be based on actual compressed air consumption, operating pressure, simultaneous machine usage, production schedules and the expected demand profile.

The SJ RF100 delivers a specified 410 CFM (11.61 m³/min) at 10 bar, making it a capacity option for industrial facilities with significant compressed air requirements.

This airflow level can be evaluated for applications where several production machines or departments operate simultaneously and require a common compressed air source.

WHERE A 100 HP COMPRESSOR CAN BE CONSIDERED

1. LARGE MANUFACTURING FACILITIES

Manufacturing plants with several pneumatic production lines may require a centralised compressor installation. The SJ RF100 can be evaluated where the combined demand of connected equipment is compatible with its rated airflow and pressure.

2. AUTOMOTIVE COMPONENT PLANTS

Automotive manufacturing facilities may operate pneumatic assembly tools, automated production equipment, material-handling systems, clamping devices and other compressed-air-consuming machinery. The compressor capacity should be matched to the simultaneous demand of these operations.

3. ENGINEERING AND METAL PROCESSING INDUSTRIES

Large engineering facilities may use compressed air across fabrication, machining, assembly, maintenance and material-handling departments. A 100 HP compressor can be considered where the combined air demand and pressure requirements justify this capacity.

4. CNC AND MACHINING FACILITIES

Multiple CNC machines and associated pneumatic equipment can contribute to substantial compressed air demand. Actual consumption depends on machine design, pneumatic functions, operating cycles and the number of machines running simultaneously.

5. INDUSTRIAL AUTOMATION

Automated production systems may use compressed air for cylinders, actuators, pneumatic positioning equipment, control mechanisms and material movement. The compressor must be selected according to the combined demand and pressure requirements of the complete automation system.

6. METAL FABRICATION AND INDUSTRIAL WORKSHOPS

Larger fabrication facilities may use pneumatic tools, air-operated equipment, cleaning systems and production machinery across multiple workstations. The SJ RF100 can be assessed where measured air demand is consistent with its rated delivery.

7. PACKAGING AND PRODUCTION LINES

Packaging plants may operate multiple pneumatic cylinders, actuators, automated handling systems and other air-operated production equipment. The total consumption and peak demand should be evaluated before determining the required compressor capacity.

8. TEXTILE AND GENERAL PROCESSING INDUSTRIES

Textile and other processing plants may use compressed air for automated machinery, pneumatic controls and production operations. Their actual air consumption depends on the number and type of machines, production speed and operating schedule.

WHY THE 10 BAR PRESSURE RATING MATTERS

The SJ RF100 is specified for a maximum operating pressure of 10 bar (145 PSI / 1 MPa).

Pressure selection is an important part of compressor sizing because different machines and industrial processes have different compressed air pressure requirements.

A compressor should provide sufficient pressure at the point of use after accounting for pressure losses across the distribution network, filters, dryers, valves, fittings and other system components.

For example, a machine requiring a specified inlet pressure may not receive that pressure if the compressor discharge pressure is set too low or if the distribution system has excessive pressure losses.

The SJ RF100's 10 bar rating should therefore be considered in relation to the actual requirements of the connected machinery.

IMPORTANT PRESSURE-SELECTION CONSIDERATIONS

- Verify the minimum operating pressure required by each connected machine.
- Account for pressure losses across air treatment equipment.
- Evaluate the pressure drop through the distribution piping.
- Consider peak air demand and pressure fluctuations.
- Configure compressor pressure settings according to the system design.
- Avoid operating at unnecessarily high pressure.

Higher compression pressure generally requires more energy. Therefore, a 10 bar compressor should not automatically be selected for an installation that can operate efficiently at a lower pressure.

The objective is to supply the pressure genuinely required by the production process while avoiding unnecessary compression energy consumption.

ADVANCED ROTARY SCREW COMPRESSION TECHNOLOGY

The SJ RF100 belongs to the Sarv Jagat R Series Fixed Speed Single Stage Rotary Screw Compressor range.

Rotary screw compressors use two intermeshing screw rotors to compress incoming air within a specially designed compression chamber.

As the rotors rotate, air enters the compression element and becomes trapped between the rotor profiles and housing. The movement of the trapped air towards the discharge side reduces the available chamber volume, increasing the air pressure.

This compression principle is used in industrial compressed air systems requiring substantial airflow capacity.

The SJ RF100 uses a single-stage rotary screw arrangement as specified for this model. The compression process is carried out through one compression stage rather than a multi-stage arrangement.

The selection of a rotary screw compressor for a large industrial installation should consider rated airflow, operating pressure, duty requirements, installation environment, maintenance access and the complete compressed air distribution system.

KEY FUNCTIONAL AREAS OF ROTARY SCREW COMPRESSION

1. AIR INTAKE

Ambient air enters the compressor through its intake arrangement. Appropriate air filtration helps reduce the entry of airborne dust and particulate contamination into the compression system.

2. COMPRESSION ELEMENT

The rotary screw air end performs the primary compression function. The interaction of the screw rotors creates the compression process required to generate the specified compressed air output.

3. DISCHARGE SYSTEM

Compressed air moves towards the discharge side of the compressor. The system must be designed to handle the specified operating pressure and airflow.

4. AIR-OIL SEPARATION

In an oil-injected compressor configuration, the separation system removes lubricating oil from the compressed air stream before downstream air treatment.

5. COOLING AND LUBRICATION

The cooling and lubrication arrangements support the operating requirements of the compressor. Their configuration and maintenance are important for controlling operating temperatures and protecting relevant components.

6. DOWNSTREAM AIR TREATMENT

Compressed air may contain moisture and contaminants depending on the compressor configuration and ambient conditions. Air dryers, moisture separators and filters can be selected according to the quality requirements of the connected production equipment.

The complete compressed air system should be designed around the required pressure, airflow, moisture level and filtration specification rather than relying on compressor capacity alone.

FIXED SPEED OPERATING TECHNOLOGY

The SJ RF100 is a fixed-speed rotary screw air compressor.

In fixed-speed compressor technology, the motor operates at its designed fixed speed during loaded operation. Unlike a variable frequency drive compressor, it does not continuously adjust motor speed to follow changes in compressed air consumption.

Industrial fixed-speed screw compressors commonly regulate air delivery through a load/unload operating arrangement.

When the compressed air system requires air, the compressor operates in the loaded condition and supplies compressed air to the network.

When the system reaches its configured upper pressure limit and demand decreases, the compressor can move into an unloaded condition according to its control arrangement.

When system pressure reduces to the configured lower control limit, the compressor can return to loaded operation.

The precise loading sequence, unloading arrangement, pressure settings and available controller functions depend on the supplied electrical and control configuration.

CHARACTERISTICS OF FIXED SPEED OPERATION

1. FIXED MOTOR SPEED DURING LOADED OPERATION

The motor runs at its designed operating speed during the loaded condition rather than continuously changing its rotational speed according to demand.

2. LOAD/UNLOAD CAPACITY CONTROL

Capacity regulation commonly takes place through loading and unloading according to the configured pressure-control arrangement.

3. SUITABILITY FOR APPROPRIATELY SIZED SYSTEMS

Fixed-speed compressors can be suitable for installations with relatively stable compressed air consumption when the compressor capacity is matched to the demand.

4. IMPORTANCE OF DEMAND MANAGEMENT

A large compressor connected to a system with substantially fluctuating demand may experience extended unloaded periods or frequent loading and unloading cycles.

5. OPERATING COST CONSIDERATIONS

Electricity consumption depends on loaded operating hours, unloaded operating hours, pressure settings, actual demand, leakage and overall system efficiency.

FIXED SPEED COMPRESSOR SELECTION FOR LARGE INDUSTRIAL PLANTS

For a 100 HP compressor, evaluating the demand profile is particularly important because the installed motor power is substantial.

If the production facility operates several machines simultaneously with relatively consistent compressed air demand, a correctly sized fixed-speed compressor may be a suitable option.

However, if air consumption varies significantly between production shifts, machine cycles or departments, the compressor may spend considerable time in an unloaded condition.

Unloaded operation can still consume electricity without delivering the full rated airflow to the plant.

For this reason, the SJ RF100 should be selected after evaluating the plant's actual compressed air consumption and operating schedule.

Where demand fluctuates substantially, a VFD compressor or a coordinated combination of fixed-speed and variable-speed compressors may also be evaluated. The correct solution depends on the demand profile, annual operating hours, electricity tariff, pressure requirements and lifecycle cost.

PREMIUM INDUSTRIAL COMPONENTS

An industrial screw compressor is a combination of mechanical, electrical, lubrication, filtration, cooling and control systems. The performance and service life of the complete machine depend on the suitability of these components and their maintenance.

The SJ RF100 belongs to the Sarv Jagat industrial screw compressor range. Its final component specifications, brands and equipment configuration should be confirmed from the approved technical quotation and supplied product documentation.

IMPORTANT COMPONENT GROUPS

1. ROTARY SCREW AIR END

The air end is the primary compression assembly. It contains the screw rotor arrangement responsible for compressing incoming air.

Its design, manufacturing quality, operating conditions, lubrication requirements and maintenance condition influence the compressor's performance.

2. ELECTRIC MOTOR

The motor provides the mechanical power required to operate the compression system.

The SJ RF100 has a specified motor power of 100 HP (75 kW). The motor's efficiency class, enclosure protection, insulation class, voltage, current and other electrical details should be verified from the supplied motor documentation.

3. AIR INTAKE FILTER

The intake filter helps prevent dust and airborne particulate contamination from entering the compression element.

Regular inspection is important because a clogged or restricted filter can affect air intake conditions and compressor operation.

4. LUBRICATION SYSTEM

Where an oil-injected configuration is supplied, lubricating oil supports the operation of the compression element and associated components.

Correct oil selection, operating condition and service intervals should follow the supplied manufacturer's requirements.

5. OIL FILTER

The oil filter helps remove contaminants from the circulating lubricating oil in an oil-injected compressor configuration.

Its condition is important for maintaining the intended lubrication-system performance.

6. AIR-OIL SEPARATOR ELEMENT

In an oil-injected screw compressor, the separator element separates lubricating oil from compressed air before the air proceeds towards the discharge system.

The correct separator element specification and timely replacement are important for maintaining separation performance.

7. COOLING SYSTEM

The cooling arrangement helps manage the heat generated during compression and compressor operation.

Cooling performance depends on the supplied design, ambient temperature, ventilation, cleanliness of cooling surfaces and operating conditions.

8. CONTROLLER AND ELECTRICAL SYSTEM

The controller and electrical system manage compressor operation according to the supplied configuration.

Available functions may include pressure monitoring, operating status indication, alarm indication and protection functions, subject to the controller and electrical arrangement.

9. INDUSTRIAL ENCLOSURE

Where included in the supplied design, the enclosure provides a structured arrangement for housing compressor components and supporting access for inspection and servicing.

COMPONENT SELECTION AND CONFIGURATION

Different compressor configurations may use different air-end models, motor specifications, controllers, filters, separators and cooling arrangements.

Therefore, the presence of a particular component brand or specification should not be assumed from the SJ RF100 model designation alone.

The approved quotation and technical documentation should be used to confirm the actual supplied component configuration.

RELIABLE INDUSTRIAL PERFORMANCE

Large manufacturing facilities depend on compressed air for production machinery, automation systems, pneumatic tools, material handling and various auxiliary operations.

An interruption or pressure drop in the compressed air network can affect production cycles, machine operation and overall plant productivity.

The SJ RF100 provides a specified airflow capacity of 410 CFM (11.61 m³/min) at 10 bar, giving industrial buyers a defined reference for compressor selection and compressed air system planning.

For effective operation, the compressor must be installed and maintained according to the approved technical requirements.

IMPORTANT INSTALLATION AND OPERATING CONSIDERATIONS

1. COMPRESSOR ROOM VENTILATION

Provide adequate ventilation and sufficient air circulation around the compressor. The cooling air inlet and hot-air discharge path should not be obstructed.

2. AMBIENT CONDITIONS

Operate the compressor within the permitted ambient temperature and environmental conditions specified for the supplied configuration.

3. ELECTRICAL SUPPLY

Ensure that the electrical supply, motor starting arrangement, cable sizing and protective devices are appropriate for the 75 kW motor and approved electrical design.

4. COMPRESSED AIR PIPELINE

The distribution network should be correctly sized for the required airflow and pressure. Undersized piping can create excessive pressure losses, particularly where large airflow volumes are required.

5. AIR RECEIVER CAPACITY

Air receiver sizing should consider the compressor's control arrangement, system pressure limits, peak demand and required storage duration.

6. AIR TREATMENT

Select appropriate dryers, filters and moisture separators according to the required compressed air quality and downstream application.

7. LEAKAGE MANAGEMENT

Inspect pipelines, fittings, valves and pneumatic connections for compressed air leakage. Leakage increases unnecessary demand and compressor operating hours.

8. ROUTINE MAINTENANCE

Inspect and service intake filters, oil filters, separator elements, lubricating oil and cooling surfaces according to the applicable maintenance schedule.

9. OPERATING PRESSURE

Set the compressor pressure according to the requirements of the connected machinery. Avoid unnecessary pressure increases because higher compression pressure generally increases energy consumption.

10. SYSTEM PERFORMANCE MONITORING

Where appropriate, monitor compressor operating hours, loaded and unloaded periods, pressure stability, airflow consumption and system leakage.

A well-designed compressed air installation should be evaluated as a complete system. Compressor capacity, air storage, treatment equipment, pressure losses, distribution piping and production demand must work together.

The SJ RF100 100 HP 10 Bar Fixed Speed Screw Air Compressor is therefore a capacity-specific option for industrial users evaluating a 75 kW single-stage rotary screw compressor with a rated airflow of 410 CFM at 10 bar.

Sarv Jagat provides industrial air compressor solutions, associated compressed air equipment, spare parts and service support for businesses requiring industrial compressed air systems.

HEAVY DUTY COOLING SYSTEM

In a 100 HP industrial screw compressor, thermal management is an important part of reliable operation. Compression generates heat, and the cooling arrangement must manage the thermal load under the compressor's intended operating conditions.

The SJ RF100 75 kW Fixed Speed Screw Air Compressor is designed for industrial compressed air applications requiring 410 CFM (11.61 m³/min) at 10 bar. For installations operating this capacity of equipment, adequate cooling airflow, suitable ambient conditions and regular maintenance are important considerations.

The cooling arrangement should be evaluated according to the actual supplied compressor configuration and its technical documentation.

IMPORTANT COOLING SYSTEM CONSIDERATIONS

1. HEAT MANAGEMENT

The cooling system helps manage heat generated during compression and operation. Maintaining suitable operating temperatures is important for the compressor's mechanical and lubrication systems.

2. COOLING AIR CIRCULATION

The compressor installation should provide adequate airflow around the equipment. The cooling air inlet and hot-air discharge path must remain unobstructed.

3. AMBIENT TEMPERATURE

The compressor should operate within the ambient temperature limits specified for the supplied configuration. High ambient temperatures can reduce the available cooling margin and affect operating conditions.

4. COOLER CLEANLINESS

Dust accumulation on cooling surfaces can restrict airflow and reduce heat-transfer effectiveness. Inspection and cleaning should be performed according to the manufacturer's maintenance instructions.

5. INSTALLATION ENVIRONMENT

A suitable compressor room should provide adequate ventilation, service access and protection from excessive dust, moisture and other environmental conditions that could affect equipment operation.

6. MAINTENANCE ACCESS

The installation should provide sufficient clearance for inspecting and servicing cooling components, filters and other maintenance points.

For a 100 HP compressor, the cooling arrangement and compressor-room ventilation should be considered during installation planning rather than after the equipment has been commissioned.

INTELLIGENT ELECTRICAL & SAFETY FEATURES

The electrical and control system of the SJ RF100 manages the operation of its 75 kW fixed-speed motor and the associated compressor functions.

A 100 HP compressor requires an appropriately designed electrical installation. Motor starting current, supply voltage, electrical protection, cable sizing, earthing and control-system compatibility should be considered according to the actual motor nameplate and approved electrical documentation.

KEY ELECTRICAL AND CONTROL CONSIDERATIONS

1. FIXED-SPEED MOTOR OPERATION

The motor operates at its designed speed during loaded operation. The electrical starting and operating arrangement must be compatible with the supplied motor and compressor configuration.

2. LOAD/UNLOAD CONTROL

The compressor commonly regulates its air delivery through a load/unload arrangement. Loading and unloading are controlled according to system pressure and the configured control sequence.

3. PRESSURE MONITORING

Pressure monitoring supports operation within the configured pressure-control limits. The pressure settings should be established according to the requirements of the connected production machinery.

4. TEMPERATURE PROTECTION

Temperature monitoring and protection functions, where provided by the supplied controller, help identify abnormal operating conditions.

5. MOTOR PROTECTION

Suitable electrical protection should be selected according to the motor's rated current, starting arrangement, supply conditions and applicable electrical design requirements.

6. CONTROLLER DISPLAY AND STATUS INDICATION

The supplied controller may provide operating information, system status and alarm indications according to its model and configuration.

7. ALARM AND FAULT MANAGEMENT

Controller-based alarm functions can help operators identify abnormal conditions. Available monitoring and protection functions depend on the supplied controller and electrical configuration.

8. EMERGENCY STOP

The compressor should have an appropriate emergency stopping arrangement according to the supplied machine design and applicable safety requirements. Operators should know its location and correct operating procedure.

IMPORTANT ELECTRICAL INSTALLATION NOTE

Electrical panel inspection, motor wiring, protective-device selection and electrical maintenance should be carried out by qualified personnel.

The actual controller functions, starting method, protection features and electrical accessories should be confirmed from the approved technical documentation. These should not be assumed from the model number alone.

STANDARD FEATURES

The following describes the main functional characteristics of the SJ RF100 fixed-speed single-stage rotary screw compressor category. Exact included equipment, component brands and configuration must be confirmed against the approved quotation and supplied product documentation.

1. 100 HP INDUSTRIAL POWER CONFIGURATION

A 100 HP motor power rating, equivalent to 75 kW, for industrial compressed air applications.

2. SINGLE-STAGE ROTARY SCREW COMPRESSION

A single-stage rotary screw compression arrangement as specified for the SJ RF100 model.

3. FIXED-SPEED OPERATING TECHNOLOGY

Fixed motor-speed operation during loaded conditions, with capacity regulation according to the supplied control arrangement.

4. 10 BAR PRESSURE RATING

A specified maximum operating pressure of 10 bar, equivalent to 145 PSI or 1 MPa.

5. 410 CFM RATED AIR DELIVERY

A specified air delivery capacity of 410 CFM, equivalent to 11.61 m³/min, at the 10 bar configuration.

6. AIR INTAKE FILTRATION

An intake filtration arrangement helps reduce the entry of airborne particulate contamination into the compression system.

7. LUBRICATION ARRANGEMENT

For an oil-injected compressor configuration, the lubrication system supports the operation of the compression element and associated components.

8. OIL FILTRATION

An oil filter in the oil-injected configuration helps remove contaminants from circulating lubricating oil.

9. AIR-OIL SEPARATION

An air-oil separation arrangement is used in an oil-injected configuration to separate lubricating oil from compressed air.

10. COOLING ARRANGEMENT

A cooling system designed according to the supplied compressor configuration and its thermal operating requirements.

11. ELECTRICAL AND CONTROL SYSTEM

An electrical and control arrangement suitable for fixed-speed compressor operation, with available functions determined by the supplied controller and configuration.

12. SERVICEABLE COMPONENTS

Routine inspection and servicing of filters, lubrication components, separation elements and cooling surfaces are important for maintaining compressor operation.

13. INDUSTRIAL INSTALLATION REQUIREMENTS

The compressor should be installed with appropriate ventilation, electrical supply, service access and compressed air connections according to its approved technical documentation.

OPTIONAL FEATURES

The following equipment can be evaluated when configuring the complete compressed air system around the SJ RF100. These items should be considered optional unless expressly included in the approved quotation.

1. AIR RECEIVER TANK

An air receiver provides compressed air storage and helps manage short-duration variations in compressed air demand.

For a 100 HP installation, receiver sizing should consider the compressor's load/unload control arrangement, peak demand, allowable pressure variation and required storage duration.

The tank should be selected according to the system design rather than using motor horsepower as the only sizing parameter.

2. REFRIGERATED AIR DRYER

A refrigerated air dryer reduces moisture content by cooling compressed air and removing condensed water.

It can be considered for industrial applications requiring a suitable refrigerated dryer pressure dew point.

The dryer should be selected according to actual airflow, operating pressure, inlet temperature, ambient conditions and the required pressure dew point.

3. DESICCANT AIR DRYER

A desiccant air dryer can be evaluated when a lower pressure dew point is required.

Applications involving moisture-sensitive production equipment, specialised pneumatic systems or particular process requirements may need a desiccant drying arrangement.

The selection should consider the required dew point, operating conditions, purge-air consumption and lifecycle cost.

4. MOISTURE SEPARATOR

A moisture separator helps remove liquid water droplets from compressed air.

It can be installed at suitable locations in the compressed air system to support condensate management.

5. PRE-FILTER

A pre-filter can be selected to remove specified particulate and liquid contaminants before downstream air treatment equipment.

6. AFTER-FILTER

An after-filter can provide additional filtration according to the required compressed air quality and the filtration grade selected.

7. MICRO FILTER

A suitable micro-filter can be used when finer removal of oil aerosols and particulate contamination is required.

Its filtration performance should be verified from the manufacturer's specified filtration rating and operating conditions.

8. ACTIVATED CARBON FILTER

An activated carbon filter can be considered where reduction of residual oil vapour and odour is required.

It should be selected as part of an appropriately designed filtration arrangement and does not replace the need for particulate filtration or drying.

9. AUTOMATIC CONDENSATE DRAIN

Automatic condensate drains can help discharge accumulated water from compatible air receivers, filters and dryers.

Drain capacity and pressure compatibility should be checked against the equipment and expected condensate load.

10. ALUMINIUM COMPRESSED AIR PIPING

An aluminium compressed air piping system can be evaluated for centralised industrial air distribution.

For a 410 CFM installation, pipe diameter and network configuration should be selected according to airflow, operating pressure, distribution distance and acceptable pressure drop.

11. OIL-WATER SEPARATOR

An oil-water separator can be used to treat suitable compressor condensate before disposal, subject to local environmental and wastewater disposal requirements.

12. AIRFLOW METER

An airflow meter can help monitor actual compressed air consumption across the plant.

It can support demand analysis, leakage identification, departmental consumption monitoring and compressed air system optimisation.

13. DEW POINT MONITOR

A dew point monitor can help verify the moisture condition of compressed air after the drying system.

It is particularly relevant where the production process has a defined moisture requirement.

14. CENTRAL COMPRESSED AIR DISTRIBUTION SYSTEM

A centralised installation can incorporate the compressor, air receiver, dryer, filtration equipment, condensate management and distribution piping.

For larger manufacturing plants, the complete arrangement should be evaluated according to the total air demand, pressure stability and production operating schedule.

15. COMPRESSED AIR LEAK DETECTION

Leak detection and repair can help reduce unnecessary compressed air consumption. This is particularly relevant in larger facilities with extensive piping networks and numerous pneumatic connections.

TECHNICAL SPECIFICATIONS

Product: SJ RF100 Fixed Speed Screw Air Compressor

Brand: Sarv Jagat

Series: SJ R Series

Model Number: SJ RF100

Compressor Type: Fixed Speed Rotary Screw Air Compressor

Compression Technology: Single Stage Rotary Screw

Motor Power: 100 HP

Motor Power (kW): 75 kW

Maximum Operating Pressure: 10 Bar

Pressure (PSI): 145 PSI

Pressure (MPa): 1 MPa

Air Delivery Capacity: 410 CFM

Air Delivery Capacity (Metric): 11.61 m³/min

Operating Technology: Fixed Speed

IMPORTANT SPECIFICATION VERIFICATION

The above specifications correspond to the SJ RF100 10 bar configuration in the official Sarv Jagat compressor specification sheet.

The three airflow values listed for this model are:

- 8 bar: 480 CFM / 13.59 m³/min.
- 10 bar: 410 CFM / 11.61 m³/min.
- 13 bar: 346 CFM / 9.79 m³/min.

This product page specifically describes the 10 bar configuration. The 410 CFM and 11.61 m³/min values must be used for this version.

The listed airflow should not be replaced with the 8 bar or 13 bar capacity when preparing quotations, product listings or technical comparisons.

The final compressor selection should be based on the actual required airflow, pressure, connected machinery and operating conditions.

INDUSTRIAL APPLICATIONS

The SJ RF100 100 HP 10 Bar Fixed Speed Screw Air Compressor is a capacity option for industrial facilities evaluating a compressed air supply of 410 CFM at 10 bar.

Its suitability depends on the total air consumption of the production equipment, operating pressure, duty requirements, air quality and the installation environment.

The following applications represent potential industrial uses where the compressor capacity and pressure may be evaluated against actual plant requirements.

1. LARGE AUTOMOTIVE MANUFACTURING FACILITIES

Automotive manufacturing plants may use compressed air across assembly lines, pneumatic tools, component handling, automated stations, clamping equipment and production machinery.

The SJ RF100 can be evaluated for larger automotive facilities where multiple departments operate simultaneously and the combined compressed air demand is compatible with its rated airflow.

2. AUTOMOTIVE COMPONENT AND ANCILLARY INDUSTRIES

Manufacturers of automotive components may use compressed air for machining, assembly, pneumatic fixtures, automated handling and selected production operations.

The required capacity depends on the number of machines, pneumatic functions and simultaneous operating conditions.

3. METAL FABRICATION AND HEAVY ENGINEERING

Metal fabrication plants may operate pneumatic tools, material-handling equipment, automated machinery and air-operated production systems.

For larger engineering workshops, the SJ RF100 can be considered when the combined air demand and required pressure justify a 100 HP compressor.

4. CNC MACHINING AND LARGE MACHINE SHOPS

Facilities operating multiple CNC machines may require compressed air for pneumatic clamping, machine accessories, actuators, cleaning and other machine-specific functions.

Actual consumption varies according to machine design and operating cycles. The compressor should be selected after evaluating simultaneous machine demand and the minimum required pressure at each machine.

5. METAL PROCESSING AND INDUSTRIAL PRODUCTION

Metal processing facilities may use compressed air for pneumatic automation, material movement, production equipment and auxiliary operations.

The SJ RF100 can be evaluated where the plant requires a central compressed air supply and its measured demand is within the compressor's suitable operating range.

6. INDUSTRIAL AUTOMATION AND ASSEMBLY LINES

Automated production systems may use pneumatic cylinders, actuators, grippers, positioning equipment and control mechanisms.

A central compressor can support several production stations, provided the total airflow demand and pressure requirements are correctly calculated.

7. TEXTILE MANUFACTURING FACILITIES

Textile plants may use compressed air for pneumatic controls, automated textile machinery, actuators and other production functions.

Air consumption depends on the textile process, number of machines, production speed and operating schedule.

The compressor capacity should be selected using the actual demand of the installed machinery rather than a general industry assumption.

8. PACKAGING AND BOTTLING INDUSTRIES

Packaging facilities may use compressed air for pneumatic cylinders, product handling, automated movement, packaging machinery and other production functions.

Where multiple packaging lines operate simultaneously, total consumption and peak demand should be considered before selecting a compressor.

For bottling and PET-related production, specialised high-pressure air requirements must be evaluated separately. The SJ RF100's 10 bar rating should not be assumed suitable for processes requiring higher-pressure compressed air.

9. PLASTIC PROCESSING AND MOULDING INDUSTRIES

Plastic processing facilities may use compressed air for pneumatic automation, material handling, actuators and auxiliary machine functions.

The required compressor capacity depends on the process, machine configuration and whether specialised high-pressure air is required.

10. INDUSTRIAL CONVEYING AND MATERIAL HANDLING

Certain material-handling and conveying systems use compressed air for pneumatic actuation and process operations.

The pressure and airflow requirements should be established from the equipment supplier's specifications. Specialised pneumatic conveying applications may require a separate engineering assessment.

11. GENERAL MANUFACTURING AND CENTRAL UTILITY SYSTEMS

Large factories may distribute compressed air to several departments through a common network.

The SJ RF100 can be evaluated as a central utility compressor when the measured demand, pressure requirement and operating profile are compatible with its specified capacity.

12. INDUSTRIAL MAINTENANCE AND PRODUCTION WORKSHOPS

Large maintenance departments and production workshops may operate pneumatic tools, cleaning equipment, air-operated machinery and auxiliary systems.

The SJ RF100 can be considered where the combined demand is sufficient to justify its rated capacity.

13. INDUSTRIAL EQUIPMENT MANUFACTURING

Manufacturers of industrial machinery may use compressed air during assembly, testing, pneumatic actuation and production operations.

A centralised compressed air arrangement can support multiple workstations when designed according to their combined consumption and pressure requirements.

14. FOOD AND PHARMACEUTICAL MANUFACTURING

Food and pharmaceutical plants may use compressed air for packaging machinery, pneumatic controls, conveying systems and general utility functions.

Where compressed air comes into direct contact with products or critical process surfaces, the required air-quality classification, oil and particulate limits, moisture control and validation must be established separately.

A general industrial compressor installation should not automatically be considered suitable for critical product-contact compressed air.

15. LARGE INDUSTRIAL PLANTS WITH MULTIPLE PRODUCTION DEPARTMENTS

Plants operating multiple departments may benefit from evaluating a centralised compressed air network.

The SJ RF100 can be assessed as one compressor capacity option within such a system. Depending on the demand profile, the plant may also require additional compressors, standby capacity or a combination of fixed-speed and VFD machines.

COMPATIBLE ACCESSORIES

The SJ RF100 can be evaluated as the main compressor in a larger compressed air installation. The associated accessories should be selected according to airflow, operating pressure, moisture requirements, filtration specifications and the connected production equipment.

1. AIR RECEIVER TANK

Provides compressed air storage and helps manage short-term demand fluctuations.

2. REFRIGERATED AIR DRYER

Reduces moisture content for industrial applications requiring a suitable refrigerated dryer pressure dew point.

3. DESICCANT AIR DRYER

Provides lower pressure dew points where the production process requires a higher level of air dryness.

4. MOISTURE SEPARATOR

Removes liquid water droplets from compressed air.

5. PRE-FILTER

Removes specified particulate and liquid contaminants before downstream equipment.

6. AFTER-FILTER

Provides additional filtration according to the required air-quality specification.

7. MICRO FILTER

Supports finer removal of oil aerosols and particulates when selected to the appropriate filtration grade.

8. ACTIVATED CARBON FILTER

Helps reduce residual oil vapour and odour where required by the application.

9. AUTOMATIC DRAIN VALVE

Helps discharge accumulated condensate from compatible air-system components.

10. ALUMINIUM AIR PIPING

Provides a modular distribution arrangement when correctly sized for airflow and pressure requirements.

11. OIL-WATER SEPARATOR

Supports appropriate condensate treatment before disposal, according to local environmental requirements.

12. AIRFLOW METER

Measures compressed air consumption and supports system-demand monitoring.

13. DEW POINT MONITOR

Monitors the moisture condition of compressed air after the drying system.

14. PRESSURE REGULATOR

Helps regulate downstream pressure for equipment requiring a specific operating pressure, provided the selected regulator is suitable for the required airflow and pressure rating.

15. COMPRESSED AIR LEAK DETECTION EQUIPMENT

Supports identification and reduction of compressed air leakage across the distribution network.

16. CENTRAL AIR DISTRIBUTION SYSTEM

Connects the compressor with receivers, dryers, filters and production departments through an appropriately engineered piping network.

Accessory capacity and pressure ratings should be selected according to the actual operating conditions. A dryer or filter should not be selected merely by matching its nominal CFM rating; its corrected capacity under actual inlet temperature, pressure and ambient conditions must also be considered.

FREQUENTLY ASKED QUESTIONS

Q1. WHAT IS THE AIR DELIVERY CAPACITY OF THE SJ RF100 100 HP SCREW AIR COMPRESSOR?

The SJ RF100 has a specified airflow capacity of 410 CFM, equivalent to 11.61 m³/min, at 10 bar operating pressure. These values are taken from the official Sarv Jagat compressor specification sheet.

Q2. WHAT IS THE MOTOR POWER OF THE SJ RF100?

The SJ RF100 has a rated motor power of 100 HP, equivalent to 75 kW.

Q3. WHAT IS THE OPERATING PRESSURE OF THE SJ RF100?

The SJ RF100 is specified for a maximum operating pressure of 10 bar, equivalent to 145 PSI or 1 MPa.

Q4. IS THE SJ RF100 A FIXED SPEED OR VFD SCREW COMPRESSOR?

The SJ RF100 is a fixed-speed rotary screw compressor. Its motor operates at its designed fixed speed during loaded operation. Capacity regulation commonly takes place through a load/unload arrangement, subject to the supplied control configuration.

Q5. WHAT IS THE DIFFERENCE BETWEEN THE SJ RF100 FIXED SPEED AND A VFD COMPRESSOR?

A fixed-speed compressor operates its motor at a designed fixed speed during loaded operation and commonly regulates capacity through load/unload control.

A VFD compressor varies motor speed according to compressed air demand within its designed operating range.

The choice depends on the plant's demand profile, operating hours, pressure requirements, electricity tariff and lifecycle cost.

Q6. WHICH INDUSTRIES CAN USE A 100 HP 10 BAR SCREW AIR COMPRESSOR?

Potential applications include automotive component manufacturing, large engineering facilities, metal fabrication, CNC machining, industrial automation, packaging, textile processing, plastic processing and general manufacturing.

Final suitability depends on the actual compressed air consumption and pressure requirements of the installed machinery.

Q7. CAN THE SJ RF100 SUPPLY MULTIPLE MACHINES SIMULTANEOUSLY?

It can be evaluated for supplying multiple machines through a common compressed air network.

The total simultaneous air consumption, required pressure, pressure losses and operating pattern must be calculated before confirming suitability.

The compressor's rated 410 CFM should not be treated as sufficient for every combination of connected machines without a demand assessment.

Q8. HOW SHOULD AN AIR RECEIVER TANK BE SELECTED FOR A 100 HP COMPRESSOR?

Receiver capacity depends on the compressor's load/unload control arrangement, air demand, allowable pressure variation, peak consumption and required storage duration.

The tank should be sized according to the complete compressed air system rather than selecting a capacity based only on 100 HP motor power.

Q9. WHICH AIR DRYER IS SUITABLE FOR THE SJ RF100?

The choice depends on the required pressure dew point and application.

A refrigerated air dryer may be suitable for general industrial moisture reduction. A desiccant air dryer may be required where a lower pressure dew point is necessary.

The dryer should be selected using corrected airflow capacity at actual operating pressure, inlet temperature and ambient conditions.

Q10. DOES A 10 BAR COMPRESSOR ALWAYS PROVIDE BETTER PERFORMANCE THAN AN 8 BAR COMPRESSOR?

No. The correct pressure depends on the machinery and production process.

Higher compression pressure generally requires more energy. If the plant requires only a lower pressure, operating at 10 bar may increase electricity consumption without providing a useful production advantage.

Q11. CAN THE SJ RF100 BE USED FOR PET BOTTLE BLOWING?

The SJ RF100 is specified at 10 bar. PET bottle blowing processes commonly involve specialised high-pressure compressed air requirements that must be assessed separately.

The 10 bar rating should not be treated as suitable for a high-pressure PET blowing process unless the process equipment specifically confirms that requirement.

Q12. WHAT MAINTENANCE IS REQUIRED FOR THE SJ RF100?

Maintenance depends on the supplied compressor configuration and service documentation.

Typical inspection and servicing areas for an oil-injected screw compressor include the air intake filter, oil filter, air-oil separator element, lubricating oil, cooling surfaces, electrical connections and condensate management equipment.

Replacement intervals should be based on the manufacturer's maintenance schedule and actual operating conditions.

Q13. CAN THE SJ RF100 BE USED IN A CENTRAL COMPRESSED AIR SYSTEM?

Yes, it can be evaluated for integration into a central compressed air installation.

The system should account for receiver capacity, dryer and filter sizing, condensate drainage, pressure regulation, pipe diameter, pressure losses and the operating requirements of all connected production departments.

Q14. HOW CAN ELECTRICITY COSTS BE CONTROLLED WHEN OPERATING A 100 HP COMPRESSOR?

Electricity costs depend on actual loaded and unloaded operating hours, pressure settings, compressed air leakage, demand fluctuations and system efficiency.

Practical measures include correcting leaks, avoiding unnecessarily high pressure, maintaining filters, sizing the compressor correctly, monitoring airflow and evaluating the demand profile.

A VFD alternative or coordinated compressor arrangement may also be assessed where the demand profile justifies the additional investment.

WHY CHOOSE SARV JAGAT?

Sarv Jagat Corporation provides industrial air compressor solutions, associated compressed air equipment, spare parts and service support for manufacturing and industrial customers.

The SJ RF100 is part of the Sarv Jagat R Series fixed-speed rotary screw compressor range, designed around a defined 100 HP power rating and 10 bar operating pressure.

WHY CONSIDER THE SJ RF100?

1. DEFINED INDUSTRIAL CAPACITY

A 100 HP (75 kW) motor configuration with a specified airflow of 410 CFM (11.61 m³/min) at 10 bar.

2. FIXED-SPEED ROTARY SCREW TECHNOLOGY

A single-stage rotary screw compression arrangement with fixed-speed operation during loaded conditions.

3. INDUSTRIAL PRESSURE CONFIGURATION

A specified 10 bar (145 PSI / 1 MPa) pressure rating for applications that require this operating pressure.

4. COMPRESSED AIR PRODUCT RANGE

Access to different compressor capacities and technologies, including fixed-speed and variable-speed screw compressors, reciprocating compressors and associated compressed air equipment.

5. COMPRESSED AIR SYSTEM EQUIPMENT

Air receivers, refrigerated air dryers, filters, moisture separators and other compressed air accessories can be evaluated according to the application and supply configuration.

6. SPARE PARTS AND SERVICE SUPPORT

Compressor-related spare parts and service support are available subject to model, component availability, service scope and applicable terms.

7. APPLICATION-BASED EQUIPMENT SELECTION

A focus on evaluating compressor requirements through motor power, airflow, operating pressure, connected machinery and actual production demand.

8. AHMEDABAD, GUJARAT, INDIA

Sarv Jagat Corporation operates from Ahmedabad, Gujarat, India, serving industrial customers through its compressor products and associated services.

REQUEST A QUOTATION FOR SJ RF100

Looking for a 100 HP 10 Bar Fixed Speed Screw Air Compressor for your manufacturing plant, engineering facility or industrial production system?

Contact Sarv Jagat to discuss your required airflow, operating pressure, machinery, installation conditions and complete compressed air system requirements.

To evaluate the correct compressor configuration, share the following details:

- Required operating pressure in bar.
- Estimated air consumption in CFM or m³/min.
- Number and type of connected machines.
- Simultaneous machine operating requirements.
- Average and peak compressed air demand.
- Daily operating hours and production shifts.
- Required compressed air quality and pressure dew point.
- Existing air receiver tank capacity, if available.
- Existing air dryer and filtration arrangement, if available.
- Any special process or high-pressure air requirement.

These details help determine whether the SJ RF100 is appropriate for the application or whether another compressor capacity or system arrangement should be considered.

SARV JAGAT CORPORATION
INDUSTRIAL AIR COMPRESSORS | SPARES | SERVICE

SJ RF100 – 100 HP | 75 kW | 10 BAR | 410 CFM | 11.61 m³/min

Select the compressor according to actual airflow demand, operating pressure and production requirements.
Complementary Equipment

Related Industrial Screw Compressors

View All 84 Models
SJ RF 10Fixed
10 HP 8 Bar SJ Fixed Speed Screw Air Compressor
⚙️ Fixed Speed Drive

10 HP 8 Bar SJ Fixed Speed Screw Air Compressor

Buy 10 HP 8 Bar Fixed Speed Screw Air Compressor from Sarv Jagat. Delivers 45 CFM with reliable rotary screw technology, energy efficient & Low maintenance.

Power10 HP7.5 kW
Pressure8 Bar116 PSI
Air Delivery45 CFM1.27 m³/m
View Details
SJ RF 20Fixed
20 HP 8 Bar SJ Fixed Speed Screw Air Compressor
⚙️ Fixed Speed Drive

20 HP 8 Bar SJ Fixed Speed Screw Air Compressor

Buy SJ RF20 20 HP 8 Bar Fixed Speed Screw Air Compressor. 85 CFM (2.41 m³/min), oil injected rotary screw technology for industrial use.

Power20 HP15 kW
Pressure8 Bar115 PSI
Air Delivery85 CFM2.41 m³/m
View Details
SJ RF 30Fixed
30 HP 8 Bar SJ Fixed Speed Screw Air Compressor
⚙️ Fixed Speed Drive

30 HP 8 Bar SJ Fixed Speed Screw Air Compressor

Buy SJ RF30 30 HP 8 Bar Fixed Speed Screw Air Compressor. 134 CFM (3.79 m³/min), oil injected rotary screw technology for industrial applications.

Power30 HP22 kW
Pressure8 Bar115 PSI
Air Delivery134 CFM3.79 m³/m
View Details
Call
WhatsApp
Products
Get Quote