+91-9157487233
𝕏
Back to Products Catalogue
SJ RF 60⚙️ Fixed Speed Direct Drive
60 HP 13 Bar SJ Fixed Speed Screw Air Compressor
Power: 60 HPDual Voltage (50/60 Hz Global Ready)
✓ ISO 9001:2015 Certified
✓ CE Standard Design
✓ IS 5456 Performance Rating
High Pressure Fixed Speed SJ Screw Air Compressor•Model Code: SJ RF 60

60 HP 13 Bar SJ Fixed Speed Screw Air Compressor

Discover the 60 HP 13 Bar Fixed Speed Screw Air Compressor, delivering 215 CFM at 13 bar. Designed for high-demand industrial compressed air applications.

Motor Power60 HP45 kW Electrical
Working Pressure13 Bar190 PSI Rating
Free Air Delivery215 CFM6.09 m³/min
Factory Price (Ex-Works)₹5,90,000
GST & Export Documentation Ready
Core Engineering Highlights:
Heavy-duty continuous 24/7 industrial duty electric motor (IE3/IE4 standard)
Precision asymmetric twin-screw rotor profile with SKF heavy-duty bearings
Smart MAM-880 micro-computer controller with automatic load/unload cycling
Low acoustic vibration enclosure with sound-absorbing fire-retardant foam lining
Oversized aluminum bar-plate heat exchanger with thermostatic oil control valve
WhatsApp Engineer
Factory Hotline: +91-9157487233Worldwide Sea-Worthy Packaging
Verified Technical Data Sheet

ENGINEERING SPECIFICATIONS — SJ RF 60

Tested to IS 5456 & ISO 1217 Standard
Specification ParameterCertified Engineering Rating
Motor Power60 HP / 45 kW
Working Pressure (Discharge)13 Bar / 190 PSI(g) / 1.3 MPa(g)
Free Air Delivery (FAD Capacity)215 CFM / 6.09 m³/min at 13 bar
Drive TypeFixed Speed (Direct Driven)
Cooling SystemOversized Vacuum-Brazed Aluminum Heat Exchanger
Micro-Controller PLCMAM-880 Intelligent Micro-Computer with RS-485 Modbus
Electrical Grid Compatibility415V ±10% / 3-Phase / 50 Hz (Dual Voltage 50/60 Hz Available)
Operating Sound Level70 ± 2 dB(A) Acoustic Enclosure
Unit Dimensions (L × W × H)1600 x 1050 x 1500 mm
Approx. Net Weight1470 kg
Cooling MethodHigh Efficiency Air Cooled
Voltage & Frequency415V ±10% / 3-Phase / 50 Hz
StageSingle Stage
TypeFixed Speed
TechnologyOil Injected Rotary Screw
DriveDirect Driven
Technical Documentation & Plant Application Guide

PRODUCT OVERVIEW & ENGINEERING GUIDE

Authored by Sarv Jagat Corporation Engineering Team • Official Product Whitepaper

60 HP 13 Bar SJ Fixed Speed Screw Air Compressor

The SJ RF60 is a 60 HP industrial fixed-speed rotary screw air compressor designed for high-demand compressed air installations requiring elevated operating pressure and substantial airflow.

Operating at 13 bar, the SJ RF60 delivers 215 CFM (6.09 m³/min), powered by a 45 kW motor. Its single-stage rotary screw compression technology and fixed-speed operating arrangement make it suitable for evaluating demanding industrial applications such as abrasive blasting, pneumatic drilling, construction equipment and specialised high-pressure air systems.

The RF60 is intended for production environments where compressed air is not simply a utility but an essential operating input for heavy-duty machinery and process equipment. Its selection should be based on the actual pressure requirement, total air consumption and operating pattern of the connected equipment.

With a higher airflow capacity than the 50 HP RF50 configuration at the same 13 bar pressure rating, the RF60 can support larger compatible pneumatic installations, provided their combined demand remains within the available compressor delivery.

WHY CHOOSE THE 60 HP CAPACITY?

A 60 HP compressor is considered when a smaller compressor configuration cannot adequately support the required compressed air demand at the specified working pressure.

The SJ RF60 provides 215 CFM at 13 bar, making it relevant to industrial installations with higher compressed air consumption than smaller 13 bar compressor configurations can support.

This capacity can be evaluated for:

• Larger abrasive blasting installations with appropriately sized blast equipment.
• Multiple compatible pneumatic drilling or construction tools.
• Selected mining and industrial drilling support systems.
• Heavy-duty pneumatic equipment operating at elevated pressure.
• Industrial material-handling and pneumatic conveying systems.
• Special-purpose machinery with higher compressed air consumption.
• Dedicated high-pressure compressed air networks serving multiple compatible stations.

The advantage of the 60 HP capacity is its higher rated airflow compared with smaller models in the same pressure category. However, the number of machines that can operate simultaneously depends on their individual air consumption and the pressure available at the point of use.

For example, a blasting installation with several nozzles can consume a substantial quantity of compressed air. Nozzle diameter, operating pressure and simultaneous usage must be calculated before determining whether 215 CFM is sufficient.

13 BAR HIGH-PRESSURE OPERATING CONFIGURATION

The SJ RF60 is specified for a maximum operating pressure of 13 bar(g), equivalent to 190 PSI(g) or 1.3 MPa(g).

This pressure configuration is intended for industrial processes and equipment that specifically require elevated compressed air pressure. It should be selected based on the downstream equipment's rated working pressure rather than simply choosing the highest available pressure.

The RF60 has different specified airflow values at different pressure conditions:

• 8 bar: 283 CFM / 8.01 m³/min
• 10 bar: 247 CFM / 6.99 m³/min
• 13 bar: 215 CFM / 6.09 m³/min

These figures are important for compressor selection because the available airflow changes with the operating pressure.

At 13 bar, the rated delivery is 215 CFM. This is the relevant figure for preliminary sizing of a 13 bar compressed air installation.

Where the connected machinery requires a lower working pressure, a correctly selected downstream pressure regulator can be used. The pressure regulator and all associated components must be suitable for the upstream system pressure.

ADVANCED SINGLE-STAGE ROTARY SCREW COMPRESSION TECHNOLOGY

The SJ RF60 uses single-stage rotary screw compression technology for generating compressed air.

In a rotary screw compressor, two intermeshing helical rotors compress air as it travels through the compression chamber. The reduction in trapped air volume generates the required compressed air pressure.

Unlike reciprocating piston compressors, rotary screw compressors produce a continuous compressed air flow during loaded operation. This operating principle is relevant to industrial applications where pneumatic equipment requires a steady supply of compressed air.

The main functional stages of the compression process include:

• Air intake: Atmospheric air enters through the compressor's intake filtration arrangement.
• Rotary compression: The screw rotor assembly reduces the volume of trapped air to generate pressure.
• Lubrication and cooling: In an oil-injected configuration, circulating oil supports lubrication, sealing and heat removal.
• Oil separation: The air-oil separation arrangement removes oil from compressed air in an oil-injected system.
• Air cooling: The aftercooling arrangement, where supplied, reduces compressed air temperature before downstream distribution.
• Air delivery: Compressed air is directed towards the connected receiver or distribution network.

The final air-end, lubrication, separation and cooling arrangements should be confirmed against the supplied machine configuration and approved technical documentation.

FIXED SPEED OPERATING TECHNOLOGY

The SJ RF60 operates using fixed-speed technology and a 60 HP / 45 kW electric motor.

During loaded operation, the motor runs at its configured rotational speed. Compressor capacity is generally managed through a load/unload control arrangement rather than continuous motor-speed variation.

This operating method can be suitable for industrial installations where compressed air consumption is reasonably predictable and the compressor capacity is matched to the actual demand.

Important operating characteristics include:

• Fixed motor speed during loaded operation.
• Load/unload-based capacity regulation, subject to controller configuration.
• Continuous rotary screw compression while loaded.
• Air delivery determined by the compressor configuration and operating pressure.
• Electrical consumption influenced by operating pressure, loading pattern and unloaded running time.

For facilities with widely fluctuating air demand, the load profile should be analysed before selecting a fixed-speed compressor. Frequent unloading or extended unloaded operation can increase energy consumption without producing additional useful compressed air.

Where demand varies significantly throughout the production cycle, a VFD compressor or a correctly designed combination of compressors may be worth evaluating against the site's actual operating data.

INDUSTRIAL COMPONENTS & ENGINEERING CONFIGURATION

A 60 HP compressor operating at 13 bar requires suitable mechanical, electrical and air-treatment arrangements. The performance of the complete installation depends not only on the compression element but also on component selection, maintenance and operating conditions.

The SJ RF60 functional system includes the following major component groups, with the final supplied configuration subject to the approved technical quotation.

1. Rotary Screw Air-End

The air-end performs the primary compression operation through the intermeshing screw rotors. Its selection must be appropriate for the compressor's intended operating pressure and capacity.

2. Industrial Electric Motor

The 60 HP / 45 kW motor provides the mechanical power required to drive the compression system. Motor electrical specifications, protection and supply conditions must be matched to the installation.

3. Air Intake Filtration System

The intake filter helps prevent dust and airborne particles from entering the compression element. Regular inspection and replacement are important, especially in dusty manufacturing, construction and surface-treatment environments.

4. Lubrication and Oil Filtration Arrangement

In an oil-injected screw compressor configuration, the lubrication system supports rotor operation, sealing and heat transfer. The oil filter helps control contaminants within the lubrication circuit.

5. Air-Oil Separation System

The separator removes oil from compressed air in an oil-injected configuration. Its condition is important for controlling downstream oil carryover and maintaining the intended compressor operation.

6. Cooling Arrangement

The cooling system manages heat generated during compression and oil circulation. Oil cooling and compressed air aftercooling arrangements depend on the supplied machine configuration.

7. Electrical Control Panel

The electrical control arrangement manages compressor operation and incorporates the applicable control and protection functions provided with the machine.

8. Pressure and Temperature Monitoring

Operating pressure and temperature should be monitored through the instruments and protection devices supplied with the compressor configuration.

13 BAR COMPRESSED AIR SYSTEM DESIGN

A 60 HP, 13 bar compressor should be integrated into a compressed air system designed for its actual operating requirements.

Before installation, evaluate:

• Total compressed air consumption of connected equipment.
• Required working pressure at each machine.
• Simultaneous operation of pneumatic equipment.
• Pressure losses across filters, dryers, valves and piping.
• Air receiver capacity and demand fluctuations.
• Required pressure dew point and air-quality class.
• Ambient temperature and compressor-room ventilation.
• Electrical supply and motor protection.
• Pressure ratings of all downstream equipment.

The air receiver, dryer, filters, separators, automatic drains, valves, hoses, fittings and distribution piping must be rated for the intended operating pressure and temperature. Components designed only for conventional 7–10 bar systems must not be assumed suitable for 13 bar operation.

For critical manufacturing or direct product-contact applications, compressed air treatment must be selected according to the required air-quality specification. The compressor itself does not guarantee oil-free or contamination-free compressed air.

The final system should be engineered around the actual machinery requirements, available airflow and operating conditions. This ensures that the 215 CFM rated delivery at 13 bar is evaluated correctly rather than treating motor horsepower as the only selection parameter.

HEAVY-DUTY COOLING SYSTEM

The SJ RF60 60 HP screw air compressor incorporates a cooling arrangement to manage the heat generated during compression and oil circulation. At 13 bar operating pressure, thermal management is an important part of maintaining the compressor within its intended operating conditions.

The cooling arrangement supports:

• Removal of heat from circulating compressor oil.
• Temperature management of the compression system.
• Cooling of compressed air through the aftercooling arrangement, where supplied.
• Heat dissipation through the compressor ventilation arrangement.

For reliable operation, the compressor should be installed in a properly ventilated area with sufficient clearance around the air intake and cooling surfaces. Dust accumulation on cooling surfaces should be checked periodically, particularly in mining, construction, fabrication and other dusty industrial environments.

Actual cooling configuration depends on the supplied machine variant.

INTELLIGENT ELECTRICAL & SAFETY FEATURES

The SJ RF60 uses an industrial electrical and control arrangement for managing compressor operation. The exact controller functions and protection features depend on the supplied electrical panel and configuration.

Important electrical and operational considerations include:

• Motor overload protection selected according to motor specifications.
• Pressure monitoring through the supplied pressure-control arrangement.
• Temperature monitoring and applicable high-temperature protection.
• Emergency stop provision as per the supplied electrical panel.
• Load/unload control for fixed-speed compressor operation.
• Electrical protection matched to the installation's power supply.

Operators should regularly monitor operating pressure, temperature, abnormal noise and controller indications. Electrical protection settings must be selected according to the motor nameplate, electrical drawings and applicable standards.

STANDARD FEATURES

The SJ RF60 is based on an industrial rotary screw compressor arrangement. Its functional systems include the following, with the exact supply scope subject to the approved technical quotation:

• 60 HP / 45 kW industrial electric motor.
• Single-stage rotary screw compression system.
• Fixed-speed operating arrangement.
• Air intake filtration system.
• Compressor lubrication and oil filtration arrangement.
• Air-oil separation system.
• Oil cooling arrangement.
• Compressed air aftercooling arrangement, where supplied.
• Electrical control panel.
• Pressure-control and load/unload operating arrangement.
• Industrial enclosure and ventilation arrangement, as applicable.

OPTIONAL FEATURES & COMPRESSED AIR SYSTEM ACCESSORIES

The SJ RF60 can be integrated with additional compressed air treatment and distribution equipment to meet the requirements of larger industrial installations.

1. Air Receiver Tank

A pressure-rated air receiver stores compressed air and helps manage fluctuations in system demand. It can also reduce frequent compressor loading and unloading when correctly sized. Receiver volume should be calculated according to the demand profile, operating pressure and control arrangement.

2. Refrigerated Air Dryer

A refrigerated air dryer removes moisture by cooling compressed air and separating the resulting condensate. It is suitable for applications where the required pressure dew point can be achieved through refrigerated drying.

3. Desiccant Air Dryer

For applications requiring lower pressure dew points, a desiccant dryer may be selected. It is particularly relevant where moisture-sensitive processes or demanding air-quality requirements exist.

4. Moisture Separator

A moisture separator removes bulk liquid water from compressed air before it enters downstream filtration and drying equipment.

5. Pre-Filter and After-Filter

Pre-filters and after-filters help remove particulate contamination and oil aerosols according to their filtration grades. Filter selection should follow the required compressed air quality.

6. Micro-Filter

A micro-filter can be incorporated where finer particulate and oil aerosol removal is required by downstream equipment or the production process.

7. Activated Carbon Filter

An activated carbon filter may be used to reduce residual oil vapour and odour. It should be selected as part of a properly designed filtration system and does not replace other necessary treatment stages.

8. Automatic Condensate Drain

Automatic drains remove accumulated liquid condensate from receivers, filters and other designated collection points. Correct drain selection helps prevent water accumulation in the compressed air network.

9. Aluminium Compressed Air Piping

A properly sized aluminium piping network can distribute compressed air across production departments and equipment stations. Pipe diameter, pressure rating, fittings, connection losses and future expansion requirements should be considered during system design.

10. Oil-Water Separator

An oil-water separator can be installed to treat oil-contaminated compressor condensate before disposal, subject to applicable environmental and wastewater requirements.

13 BAR SYSTEM COMPATIBILITY

The SJ RF60 is specified for 13 bar operation. All downstream equipment must therefore be suitable for the intended operating pressure and temperature.

Check the pressure ratings of:

• Air receiver tanks.
• Refrigerated and desiccant dryers.
• Moisture separators and filtration units.
• Automatic condensate drains.
• Pressure regulators and safety valves.
• Hoses, fittings and distribution piping.

Do not assume that equipment designed only for conventional 7–10 bar systems is suitable for a 13 bar installation.

Where connected machinery requires lower pressure, use an appropriately rated pressure regulator. All components must be selected and installed according to their certified operating limits and the applicable system safety requirements.

TECHNICAL SPECIFICATIONS

Model: SJ RF60
Product Type: Industrial Screw Air Compressor
Compressor Series: R Series – Fixed Speed
Power Rating: 60 HP
Motor Power: 45 kW
Operating Pressure: 13 bar(g)
Pressure Equivalent: 190 PSI(g)
Pressure Equivalent: 1.3 MPa(g)
Air Delivery at 13 bar: 215 CFM
Air Delivery at 13 bar: 6.09 m³/min
Compression Technology: Single-Stage Rotary Screw
Operating Technology: Fixed Speed

PRESSURE-WISE AIR DELIVERY REFERENCE

At 8 bar:
283 CFM / 8.01 m³/min

At 10 bar:
247 CFM / 6.99 m³/min

At 13 bar:
215 CFM / 6.09 m³/min

These are the specified airflow reference values for the SJ RF60 at different operating pressures. For a 13 bar installation, use 215 CFM / 6.09 m³/min as the rated delivery reference.

Final compressor selection must consider actual air consumption, simultaneous equipment operation, pressure losses, leakage, reserve capacity and operating conditions.

INDUSTRIAL APPLICATIONS

The SJ RF60 60 HP 13 Bar compressor is intended for evaluating industrial installations requiring both elevated operating pressure and higher airflow capacity.

Its rated delivery of 215 CFM at 13 bar makes it relevant to larger compatible pneumatic systems than those typically served by smaller 13 bar compressor models.

Application suitability must be verified against the actual working pressure and air consumption of the connected machinery.

1. Industrial Abrasive Blasting & Sandblasting

Potential applications include:

• Industrial pressure blast pots.
• Multiple-nozzle abrasive blasting installations.
• Blast-room compressed air systems.
• Steel structure surface preparation.
• Shipyard and heavy-equipment surface treatment.
• Industrial component cleaning and surface preparation.

Blasting air consumption depends on nozzle diameter, nozzle pressure, abrasive type and the number of simultaneously operating nozzles. The combined consumption must be checked against the available 215 CFM. A large multi-nozzle installation may require multiple compressors or a larger capacity system.

2. Mining & Rock Drilling Equipment

The RF60 can be evaluated for selected mining and drilling applications, including:

• Pneumatic rock drilling equipment.
• Selected DTH drilling systems.
• Industrial drilling support equipment.
• Pneumatic mining tools.
• Compressed air systems for specialised extraction operations.

DTH drilling rigs can have substantial pressure and airflow requirements. Verify the drilling equipment manufacturer's specified air consumption, operating pressure and altitude correction before selecting the RF60.

3. Construction & Infrastructure Equipment

Potential applications include selected:

• Pneumatic jackhammers.
• Industrial pneumatic breakers.
• Road and foundation drilling equipment.
• Heavy-duty demolition tools.
• Specialised construction machinery.
• Air-operated infrastructure equipment.

The RF60 can be considered where the connected equipment requires elevated pressure and its combined air consumption remains within the compressor's rated delivery.

4. Heavy-Duty Pneumatic Tool Stations

The compressor can be evaluated for larger dedicated pneumatic tool installations involving:

• Industrial impact wrenches.
• Heavy-duty riveting equipment.
• Pneumatic torque tools.
• Specialised air-operated machinery.
• Multiple compatible pneumatic workstations.

Tool pressure requirements and simultaneous consumption must be checked. The number of tools that can operate together is determined by their actual airflow demand, not simply the compressor's motor rating.

5. Industrial Pneumatic Conveying & Material Handling

Selected pressure conveying systems may use elevated-pressure compressed air to transfer powders, granules and other industrial materials.

Potential applications include:

• Pneumatic transfer of bulk materials.
• Industrial powder conveying.
• Granular material handling.
• Selected pressure conveying systems.
• Specialised process material transfer equipment.

The system must be assessed using conveying distance, material properties, pipeline diameter, solids loading and required airflow.

6. Heavy Engineering, Fabrication & Steel Processing

Selected high-pressure pneumatic installations in heavy engineering facilities can be evaluated against the RF60's capacity.

Potential applications include:

• Special-purpose pneumatic fixtures.
• Heavy-duty air-operated clamping systems.
• Dedicated fabrication machinery.
• Industrial pneumatic assembly equipment.
• Specialised surface-treatment stations.
• High-pressure air-operated production systems.

Conventional fabrication tools may operate at lower pressures. A 13 bar configuration should be selected only where the equipment specification or process requirement justifies it.

7. Industrial Cleaning & High-Pressure Air-Blowing

Certain industrial cleaning and air-blowing arrangements may require elevated compressed air pressure.

Potential applications include:

• Specialised industrial air-blowing equipment.
• Selected pneumatic cleaning machinery.
• Industrial filter-cleaning systems designed for compressed air.
• Dedicated high-pressure air-operated cleaning equipment.

Nozzle design, airflow consumption and safe operating procedures must be checked before connecting such equipment. Compressed air must never be directed towards people or used for unsafe body or clothing cleaning.

8. Special-Purpose Machinery & OEM Production Systems

The RF60 can be considered for dedicated OEM machinery and specialised industrial systems requiring higher-pressure compressed air.

Examples include:

• High-pressure pneumatic control circuits.
• Special-purpose production machines.
• Dedicated automated pneumatic equipment.
• Industrial OEM-integrated compressed air systems.
• Specialised pneumatic process installations.

The OEM's specified working pressure and air consumption should determine whether the RF60 is suitable.

APPLICATION SELECTION NOTE

A 13 bar compressor is not automatically suitable for every industrial machine. Standard CNC machines, VMCs, robotic grippers, general packaging equipment and common pneumatic actuators frequently operate at lower pressures unless their OEM specifications state otherwise.

Similarly, pipeline leak detection and pneumatic testing applications must be evaluated using the approved test procedure and equipment safety requirements. The RF60 must not be treated as a substitute for dedicated hydraulic or hydrostatic pressure-testing equipment.

The SJ RF60 should be selected where the connected process genuinely requires elevated pressure and its total compressed air demand can be supported by 215 CFM at 13 bar.

FREQUENTLY ASKED QUESTIONS

1. What is the air delivery of the SJ RF60 60 HP compressor at 13 bar?

The SJ RF60 delivers 215 CFM, equivalent to 6.09 m³/min, at 13 bar according to the specified model data.

2. What is the motor power of the SJ RF60?

The SJ RF60 has a rated motor power of 60 HP, equivalent to 45 kW.

3. What is the maximum operating pressure of the SJ RF60?

The specified maximum operating pressure is 13 bar(g), equivalent to 190 PSI(g) or 1.3 MPa(g).

4. Is the SJ RF60 suitable for industrial sandblasting?

It can be evaluated for larger abrasive blasting installations. Actual suitability depends on nozzle diameter, nozzle pressure, the number of simultaneously operating nozzles and total air consumption. The combined demand must remain within the available 215 CFM.

5. Can the RF60 be used for mining and DTH drilling equipment?

Selected drilling systems can be considered if their specified pressure and airflow requirements match the RF60's capacity. Some DTH drilling rigs require significantly higher airflow, so the equipment manufacturer's data must be checked before selection.

6. What is the difference between the RF60 8 bar, 10 bar and 13 bar configurations?

The specified air delivery changes with operating pressure:

• 8 bar: 283 CFM / 8.01 m³/min.
• 10 bar: 247 CFM / 6.99 m³/min.
• 13 bar: 215 CFM / 6.09 m³/min.

The 13 bar configuration has lower airflow than the 8 bar and 10 bar configurations. Select the operating pressure according to the actual process requirement.

7. Can the RF60 supply air to machinery requiring 7 or 8 bar?

Yes, where the system is correctly designed. An appropriately rated pressure regulator can reduce downstream pressure. The compressor and distribution system must still provide sufficient airflow at the required point-of-use pressure.

8. Which air dryer is suitable for a 60 HP, 13 bar compressor?

A refrigerated or desiccant dryer may be selected according to the required pressure dew point and air-quality specification. Dryer capacity must be evaluated at the actual inlet pressure, inlet temperature, ambient temperature and operating conditions.

9. What air receiver tank capacity is suitable for the RF60?

Receiver capacity depends on system demand, permissible pressure fluctuation, compressor control arrangement and the required stored-air duration. It should be calculated for the installation rather than selected using horsepower alone.

10. Is the SJ RF60 a fixed-speed or VFD compressor?

The SJ RF60 is a fixed-speed rotary screw compressor. Its motor operates at a configured speed during loaded operation, with capacity generally regulated through load/unload control.

11. Can the RF60 operate continuously in an industrial plant?

Operating suitability depends on the approved machine duty rating, ambient temperature, ventilation, maintenance condition, electrical supply and actual load profile. Continuous operation must be confirmed against the supplied manufacturer's operating documentation.

12. What maintenance is required for the SJ RF60?

Routine maintenance generally includes inspection and servicing of the air intake filter, compressor oil, oil filter, air-oil separator, cooling surfaces, condensate drains, electrical connections and operating parameters. Follow the supplied maintenance schedule and adjust inspections according to actual operating conditions.

13. How do I select the correct compressor for a high-pressure industrial application?

Identify the required working pressure, calculate total air consumption, determine simultaneous equipment demand, account for pressure losses and leakage, and provide an appropriate reserve capacity. For the SJ RF60 at 13 bar, the key rated delivery reference is 215 CFM / 6.09 m³/min.

WHY CHOOSE SARV JAGAT?

Sarv Jagat Corporation provides industrial compressed air solutions for manufacturing facilities, engineering companies, construction-related operations and specialised industrial applications.

The SJ RF60 60 HP 13 Bar Fixed Speed Screw Air Compressor is designed for installations requiring elevated operating pressure combined with a higher rated airflow of 215 CFM at 13 bar.

Our compressed air solutions focus on:

• Industrial rotary screw compressor configurations.
• Multiple motor power and pressure options.
• Application-based compressor selection.
• Air receiver and compressed air treatment integration.
• Industrial spare parts and service support.
• Compressed air systems for demanding industrial environments.

For a technically appropriate selection, share your required operating pressure, total air consumption, connected machinery, simultaneous operating demand and air-quality requirements with Sarv Jagat.

Our team can evaluate whether the SJ RF60 is suitable for your installation and identify the required receiver, dryer, filtration and compressed air distribution accessories.

Sarv Jagat Corporation
Ahmedabad, Gujarat, India
Industrial Air Compressors | Sales | Spares | Service | Export.
Complementary Equipment

Related Industrial Screw Compressors

View All 84 Models
SJ RF 10Fixed
10 HP 8 Bar SJ Fixed Speed Screw Air Compressor
⚙️ Fixed Speed Drive

10 HP 8 Bar SJ Fixed Speed Screw Air Compressor

Buy 10 HP 8 Bar Fixed Speed Screw Air Compressor from Sarv Jagat. Delivers 45 CFM with reliable rotary screw technology, energy efficient & Low maintenance.

Power10 HP7.5 kW
Pressure8 Bar116 PSI
Air Delivery45 CFM1.27 m³/m
View Details
SJ RF 20Fixed
20 HP 8 Bar SJ Fixed Speed Screw Air Compressor
⚙️ Fixed Speed Drive

20 HP 8 Bar SJ Fixed Speed Screw Air Compressor

Buy SJ RF20 20 HP 8 Bar Fixed Speed Screw Air Compressor. 85 CFM (2.41 m³/min), oil injected rotary screw technology for industrial use.

Power20 HP15 kW
Pressure8 Bar115 PSI
Air Delivery85 CFM2.41 m³/m
View Details
SJ RF 30Fixed
30 HP 8 Bar SJ Fixed Speed Screw Air Compressor
⚙️ Fixed Speed Drive

30 HP 8 Bar SJ Fixed Speed Screw Air Compressor

Buy SJ RF30 30 HP 8 Bar Fixed Speed Screw Air Compressor. 134 CFM (3.79 m³/min), oil injected rotary screw technology for industrial applications.

Power30 HP22 kW
Pressure8 Bar115 PSI
Air Delivery134 CFM3.79 m³/m
View Details
Call
WhatsApp
Products
Get Quote