+91-9157487233
𝕏
Back to Products Catalogue
SJ RF 10⚙️ Fixed Speed Direct Drive
10 HP 13 Bar SJ Fixed Speed Screw Air Compressor
Power: 10 HPDual Voltage (50/60 Hz Global Ready)
✓ ISO 9001:2015 Certified
✓ CE Standard Design
✓ IS 5456 Performance Rating
High Pressure Fixed Speed SJ Screw Air Compressor•Model Code: SJ RF 10

10 HP 13 Bar SJ Fixed Speed Screw Air Compressor

Explore the SJ RF10 10 HP 13 Bar fixed speed screw air compressor with 30 CFM airflow, Designed for highly compressed air requiring industrial applications.

Motor Power10 HP7.5 kW Electrical
Working Pressure13 Bar190 PSI Rating
Free Air Delivery30 CFM0.85 m³/min
Factory Price (Ex-Works)₹2,20,000
GST & Export Documentation Ready
Core Engineering Highlights:
Heavy-duty continuous 24/7 industrial duty electric motor (IE3/IE4 standard)
Precision asymmetric twin-screw rotor profile with SKF heavy-duty bearings
Smart MAM-880 micro-computer controller with automatic load/unload cycling
Low acoustic vibration enclosure with sound-absorbing fire-retardant foam lining
Oversized aluminum bar-plate heat exchanger with thermostatic oil control valve
WhatsApp Engineer
Factory Hotline: +91-9157487233Worldwide Sea-Worthy Packaging
Verified Technical Data Sheet

ENGINEERING SPECIFICATIONS — SJ RF 10

Tested to IS 5456 & ISO 1217 Standard
Specification ParameterCertified Engineering Rating
Motor Power10 HP / 7.5 KW
Working Pressure (Discharge)13 Bar / 190 PSI / 1.3 MPa
Free Air Delivery (FAD Capacity)30 CFM / 0.85 m³/min
Drive TypeFixed Speed (Direct Driven)
Cooling SystemOversized Vacuum-Brazed Aluminum Heat Exchanger
Micro-Controller PLCMAM-880 Intelligent Micro-Computer with RS-485 Modbus
Electrical Grid Compatibility415V ±10% / 3-Phase / 50 Hz (Dual Voltage 50/60 Hz Available)
Operating Sound Level63 ± 2 dB(A) Acoustic Enclosure
Unit Dimensions (L × W × H)1250 x 850 x 1280 mm
Approx. Net Weight370 kg
Cooling MethodHigh Efficiency Air Cooled
Voltage & Frequency415V ±10% / 3-Phase / 50 Hz
StageSingle Stage
TypeFixed Speed
TechnologyOil Injected Rotary Screw
DriveDirect Driven
Technical Documentation & Plant Application Guide

PRODUCT OVERVIEW & ENGINEERING GUIDE

Authored by Sarv Jagat Corporation Engineering Team • Official Product Whitepaper

10 HP 13 Bar SJ Fixed Speed Screw Air Compressor – SJ RF10

The SJ RF10 is a 10 HP (7.5 kW) fixed-speed rotary screw air compressor designed for industrial applications requiring compressed air at a maximum operating pressure of 13 bar(g).

With a specified airflow capacity of 30 CFM (0.85 m³/min) at 13 bar, the SJ RF10 is positioned for machinery and production processes where higher operating pressure is important but the overall compressed air consumption remains relatively limited.

Unlike conventional 7–8 bar utility air systems, a 13 bar compressed air installation can serve specialised pneumatic equipment, pressure-dependent machine functions and industrial processes designed around higher-pressure air supply.

The SJ RF10 combines a single-stage rotary screw compression arrangement with fixed-speed operating technology. It is intended for installations where compressed air demand is reasonably predictable and the required operating pressure is established by the machinery or process.

Manufactured under the Sarv Jagat brand, the SJ RF10 can be evaluated for specialised machine tools, industrial automation, pneumatic clamping, pressure-assisted equipment, engineering workshops and other applications that require a compact higher-pressure compressed air source.

PRODUCT SPECIFICATION AT A GLANCE

• Model: SJ RF10
• Compressor Type: Rotary Screw Air Compressor
• Motor Power: 10 HP
• Motor Rating: 7.5 kW
• Maximum Operating Pressure: 13 bar(g)
• Pressure Equivalent: 190 PSI(g)
• Rated Airflow at 13 bar: 30 CFM
• Airflow Equivalent: 0.85 m³/min
• Compression Arrangement: Single Stage
• Operating Technology: Fixed Speed

WHY CHOOSE THIS CAPACITY?

Selecting a compressor for a 13 bar application requires more than matching motor horsepower. The actual operating pressure, airflow consumption, simultaneous machine demand and required air quality must all be considered.

The SJ RF10 provides a specified airflow of 30 CFM at 13 bar, making it relevant to industrial equipment that requires higher pressure without requiring the large airflow volumes associated with major centralized compressed air installations.

APPLICATION-BASED CAPACITY SELECTION

1. HIGH-PRESSURE PNEUMATIC MACHINERY

Some industrial machines are designed to operate at pressures above the conventional 7–8 bar compressed air range.

The SJ RF10 can be evaluated for individual machines or small groups of pneumatic equipment where the required pressure is 13 bar and the combined airflow demand is within the compressor's rated capacity.

Examples include:
• Specialised pneumatic fixtures.
• Pressure-dependent machine actuators.
• Industrial pneumatic clamping equipment.
• Dedicated high-pressure pneumatic workstations.
• Special-purpose production machinery.

2. CNC AND MACHINE TOOL APPLICATIONS

CNC machining centres, VMC machines and other machine tools use compressed air for functions such as pneumatic clamping, tool-related operations, purging and machine auxiliaries.

However, most conventional CNC and VMC installations do not automatically require 13 bar compressed air.

The SJ RF10 should be considered only where the machine manufacturer's documentation specifies a pressure requirement compatible with its 13 bar operating rating and the machine's airflow consumption falls within the available capacity.

3. INDUSTRIAL TESTING AND PRESSURE-ASSISTED EQUIPMENT

Selected industrial testing equipment and specialised production machinery use compressed air for pneumatic actuation, pressure-assisted operation or dedicated testing functions.

The SJ RF10 may be evaluated for applications requiring a 13 bar compressed air supply, provided the process equipment is designed for compressed air at that pressure.

Important distinction: A 13 bar compressor is not automatically suitable for every pressure-testing application. The required test medium, pressure rating, safety arrangement and equipment design must be verified independently.

4. SPECIALISED ASSEMBLY AND AUTOMATION SYSTEMS

Industrial assembly operations can include pneumatic positioning, clamping, pressing auxiliaries, gripping systems and automated handling equipment.

Where a machine or dedicated pneumatic circuit requires higher-pressure air, the SJ RF10 can be evaluated as a compressed air source.

The actual suitability depends on the combined consumption of cylinders, actuators, valves, grippers and other pneumatic components.

5. ENGINEERING AND FABRICATION WORKSHOPS

Specialised engineering workshops may operate individual machines and pneumatic equipment with different pressure requirements.

The SJ RF10 can be considered for a dedicated higher-pressure air supply where the connected equipment requires 13 bar and the total demand is compatible with 30 CFM.

A separate pressure-regulated distribution arrangement may be required where other equipment operates at lower pressures.

The compressor should not be selected at 13 bar merely because some workshop equipment requires compressed air.

UNDERSTANDING THE 13 BAR AIRFLOW CAPACITY

The official SJ specification sheet provides different airflow capacities for the SJ RF10 at different operating pressure configurations:

• 8 bar: 46 CFM / 1.31 m³/min
• 10 bar: 34 CFM / 0.96 m³/min
• 13 bar: 30 CFM / 0.85 m³/min

These values are pressure-specific. The 46 CFM figure at 8 bar must not be used as the rated airflow for the 13 bar configuration.

When selecting the SJ RF10, the relevant design checks include:

• Required pressure at the machine inlet.
• Actual airflow consumption of connected machinery.
• Simultaneous operation of pneumatic equipment.
• Pressure losses through filters, dryers and pipelines.
• Air receiver capacity and peak demand.
• Required compressed air quality.
• Future changes in production demand.

The compressor's rated airflow should be compared with the actual demand at the required operating pressure. A machine requiring more than the available 30 CFM at 13 bar may need a different compressor capacity or a revised system design.

ADVANCED ROTARY SCREW COMPRESSION TECHNOLOGY

The SJ RF10 uses a single-stage rotary screw compression arrangement.

Rotary screw compressors use two intermeshing helical rotors to compress air continuously as it moves through the compression element.

During operation, air enters through the intake system and is conveyed through the rotor chambers. The available chamber volume progressively decreases as the air moves towards the discharge side, increasing its pressure.

The rotary screw principle supports continuous compressed air generation and is widely used in industrial applications requiring regular compressed air supply.

KEY FUNCTIONAL ADVANTAGES OF ROTARY SCREW TECHNOLOGY

1. CONTINUOUS ROTARY COMPRESSION

Unlike reciprocating compressors that generate compressed air through alternating piston strokes, rotary screw compressors use rotating elements to produce a continuous compression process during operation.

This operating principle is suitable for industrial applications requiring regular compressed air availability.

2. INDUSTRIAL DUTY APPLICATIONS

The rotary screw arrangement is relevant to production environments where compressed air is required repeatedly throughout operating shifts.

Actual permissible duty conditions depend on the compressor's approved design and operating limits.

3. COMPACT COMPRESSOR PACKAGE

Rotary screw compressor packages integrate the compression element with supporting systems such as the drive, cooling, filtration, lubrication and controls, according to the supplied configuration.

This arrangement can simplify installation compared with assembling separate compression and supporting components.

4. STABLE COMPRESSED AIR SUPPLY

The compressor's fixed-speed operating arrangement is intended for applications with reasonably predictable compressed air consumption.

System pressure stability also depends on receiver capacity, demand variation, compressor control settings, pipeline sizing and the connected equipment.

5. INTEGRATION WITH INDUSTRIAL AIR TREATMENT

The SJ RF10 can be integrated with suitable air receivers, moisture separators, refrigerated or desiccant air dryers, filters and compressed air distribution piping.

These accessories should be selected according to the required pressure dew point, filtration grade, operating pressure and actual airflow.

IMPORTANT CONSIDERATION FOR 13 BAR APPLICATIONS

A higher compressor pressure rating does not mean every downstream component can safely operate at that pressure.

The air receiver, pressure-relief valve, dryer, filters, drains, piping, hoses, fittings and connected machinery must all have suitable pressure ratings.

Pressure regulation should be provided wherever downstream equipment requires a lower operating pressure.

FIXED SPEED OPERATING TECHNOLOGY

The SJ RF10 belongs to the SJ R Series fixed-speed single-stage rotary screw compressor range.

A fixed-speed compressor operates its motor at its designed operating speed during loaded operation. The compressor's capacity regulation is generally managed through a load/unload or equivalent control arrangement, subject to the supplied controller configuration.

This operating technology is relevant to applications where compressed air consumption is relatively stable and the compressor is selected around a reasonably consistent demand profile.

HOW FIXED-SPEED OPERATION WORKS

1. START-UP

The compressor starts according to its control system and operating sequence.

2. LOADED OPERATION

When system pressure and demand conditions call for compressed air generation, the compressor operates in its loaded condition and supplies compressed air.

3. PRESSURE CONTROL

The compressor control system monitors system pressure and manages loaded or unloaded operation according to the configured pressure settings.

4. UNLOADED OPERATION

When system pressure reaches the configured upper control point, the compressor may move into an unloaded condition, depending on its control arrangement.

5. RELOADING

When system pressure falls to the configured lower control point, the compressor can return to loaded operation to replenish compressed air supply.

The actual control sequence, pressure settings and operating protections depend on the supplied controller and compressor configuration.

WHEN FIXED SPEED IS A PRACTICAL CHOICE

The SJ RF10 fixed-speed configuration can be evaluated where:

• Compressed air demand remains relatively consistent.
• Connected machinery operates with predictable air consumption.
• The compressor has a suitable loaded operating period.
• The application requires a dedicated 13 bar air supply.
• The system is designed around the compressor's rated 30 CFM airflow.
• A conventional fixed-speed control arrangement is appropriate for the operating profile.

FIXED SPEED AND VARIABLE SPEED: IMPORTANT DIFFERENCE

A fixed-speed compressor does not continuously adjust motor speed to match changing airflow demand in the same way as a VFD compressor.

If the connected machinery has highly variable demand, frequent unloading or significant periods of low consumption, the complete operating profile should be evaluated before selecting a fixed-speed model.

The objective is to select a compressor that meets the required pressure and airflow without unnecessary electrical consumption or excessive cycling.

PREMIUM INDUSTRIAL COMPONENTS

A reliable rotary screw compressor depends on the coordinated performance of its compression element, motor, drive arrangement, lubrication system, filtration, cooling and electrical controls.

The SJ RF10 package should be assessed as a complete industrial compressed air machine rather than by horsepower alone.

The principal functional systems include:

1. ROTARY SCREW AIR END

The air end contains the intermeshing screw rotors responsible for the compression process.

Its design and operating condition influence compressed air output, mechanical loading, operating temperature and overall compressor performance.

2. ELECTRIC MOTOR

The electric motor supplies mechanical power to the compressor drive system.

For the SJ RF10, the specified motor power is 10 HP (7.5 kW).

Motor efficiency class, enclosure protection, insulation class and electrical supply requirements should be verified from the approved motor and equipment documentation.

3. DRIVE ARRANGEMENT

The drive arrangement transfers motor power to the compressor air end.

The exact coupling or drive configuration should be confirmed from the supplied compressor specification.

4. AIR INTAKE FILTER

The intake filtration system helps prevent dust and airborne particles from entering the compression element.

Regular inspection and replacement according to operating conditions are important, particularly in dusty manufacturing environments.

5. LUBRICATION SYSTEM

For an oil-injected screw compressor configuration, lubricating oil supports rotor sealing, lubrication and heat removal.

Oil condition, oil level and service intervals should be maintained according to the manufacturer's instructions.

6. OIL FILTER

The oil filtration system removes contaminants from circulating lubricating oil and helps protect internal compressor components.

7. AIR-OIL SEPARATOR

In an oil-injected compressor arrangement, the separator system separates lubricating oil from compressed air before discharge.

The separator's condition affects oil carryover and pressure drop.

8. COOLING SYSTEM

The cooling arrangement helps control operating temperatures during compression and lubrication.

Cooling performance depends on the supplied equipment configuration, ambient conditions, ventilation and maintenance.

9. ELECTRICAL CONTROL SYSTEM

The electrical panel and controller coordinate compressor operation and available monitoring and protection functions according to the supplied configuration.

COMPONENT SELECTION AND CONFIGURATION

Specific air-end manufacturer, motor brand, controller model, electrical protection devices and component ratings should be confirmed in the approved technical quotation.

The final configuration should be evaluated against the 13 bar operating requirement and the intended industrial application.

HEAVY DUTY COOLING SYSTEM

The SJ RF10 is a 10 HP industrial rotary screw air compressor designed for applications requiring a maximum operating pressure of 13 bar(g).

During compression, heat is generated by the compression process and supporting mechanical systems. Effective cooling is therefore important for maintaining suitable operating temperatures and supporting reliable compressor operation.

The cooling arrangement is designed to manage heat generated during compressor operation. Depending on the supplied configuration, the functional cooling systems may include:

• Oil Cooler: Helps regulate lubricating oil temperature in an oil-injected compressor arrangement.
• Cooling Fan: Supports heat removal from the compressor package.
• Airflow Ventilation: Allows cooling air to circulate through the compressor enclosure.
• Temperature Monitoring: Supports monitoring of selected operating temperatures, subject to controller configuration.
• Cooling Surfaces: Dissipate heat from the relevant compressor systems.

COOLING AND INSTALLATION REQUIREMENTS

For reliable operation, the installation should provide:

• Adequate ventilation around the compressor.
• Sufficient clearance near cooling air intake and discharge openings.
• Prevention of hot-air recirculation.
• Regular cleaning of cooling surfaces and ventilation openings.
• Suitable ambient operating conditions.
• Accessibility for routine inspection and maintenance.

Dust accumulation, restricted ventilation and excessive ambient temperature can adversely affect cooling performance. The final installation should follow the manufacturer's specified operating limits.

INTELLIGENT ELECTRICAL & SAFETY FEATURES

The SJ RF10 uses fixed-speed operating technology. Its electrical control system manages compressor starting, operating conditions and available protection functions according to the supplied configuration.

Depending on the electrical panel and controller arrangement, functional provisions may include:

• Motor Protection: Helps protect the motor against specified electrical operating faults.
• Overload Protection: Protects against excessive motor loading within the protection system's design limits.
• Phase Protection: Provides phase-related electrical protection where included.
• Temperature Monitoring: Monitors selected operating temperatures where supported by the controller.
• Pressure Monitoring: Supports compressor pressure control through the supplied control arrangement.
• Emergency Stop: Provides an emergency stopping function according to the electrical configuration.
• Operating Status Display: Displays available operating information.
• Fault Indication: Indicates detected faults according to controller functionality.
• Load/Unload Control: Manages compressor loading according to configured system pressure settings, where provided.

ELECTRICAL INSTALLATION CONSIDERATIONS

The SJ RF10 has a specified motor rating of 7.5 kW. Electrical installation should be designed around the actual motor nameplate, starting arrangement and supplied electrical panel.

Important considerations include:

• Verification of the available electrical supply.
• Correct cable sizing and current-carrying capacity.
• Appropriate electrical protection and earthing.
• Motor and starter compatibility.
• Correct pressure control settings.
• Suitable ventilation around the electrical panel.
• Compliance with applicable electrical installation standards.

Electrical installation and commissioning should be carried out by qualified personnel.

STANDARD FEATURES

The following describes the principal functional systems associated with the SJ RF10 fixed-speed rotary screw compressor. Exact component brands, ratings and included equipment should be confirmed in the approved quotation.

• SJ RF10 industrial rotary screw air compressor.
• 10 HP motor power rating.
• 7.5 kW motor rating.
• 13 bar(g) maximum operating pressure.
• 190 PSI(g) pressure equivalent.
• 30 CFM rated airflow at 13 bar.
• 0.85 m³/min rated airflow at 13 bar.
• Single-stage rotary screw compression arrangement.
• Fixed-speed operating technology.
• Air intake filtration system.
• Lubrication system for oil-injected compressor configuration.
• Oil filtration system.
• Air-oil separation system for oil-injected configuration.
• Compressor cooling arrangement.
• Electrical control and protection system.
• Pressure monitoring and control according to supplied configuration.
• Industrial compressor enclosure, where included in the supplied configuration.

OPTIONAL FEATURES

The SJ RF10 can be integrated with additional compressed air storage, treatment and distribution equipment according to the pressure, airflow and air quality requirements of the connected machinery.

The following equipment should be considered optional unless specifically included in the approved quotation.

• High-Pressure Air Receiver Tank: Stores compressed air and helps manage short-duration demand fluctuations. The receiver must have an appropriate pressure rating and statutory compliance.
• Refrigerated Air Dryer: Reduces moisture content for general-purpose industrial compressed air.
• Desiccant Air Dryer: Provides lower pressure dew point air where required by the process.
• Moisture Separator: Removes bulk liquid moisture from compressed air.
• Pre-Filter: Removes particulate contamination and liquid aerosols according to its filtration rating.
• After-Filter: Provides additional downstream filtration.
• Micro Filter: Supports finer aerosol filtration requirements.
• Activated Carbon Filter: Helps reduce oil vapour and odour, subject to filter design and operating conditions.
• High-Pressure Automatic Drain Valve: Removes accumulated condensate from compatible system components.
• Pressure Regulator: Reduces and controls downstream pressure for equipment designed to operate below 13 bar.
• Pressure Gauge: Provides local indication of system pressure.
• Safety Relief Valve: Protects the relevant pressure vessel or system section when correctly selected and installed.
• High-Pressure Compressed Air Piping: Distributes compressed air through a suitably pressure-rated network.
• Oil-Water Separator: Treats oil-contaminated condensate before disposal, subject to applicable environmental requirements.
• Airflow Meter: Measures compressed air consumption.
• Dew Point Monitor: Monitors moisture performance downstream of the air dryer.

IMPORTANT ACCESSORY SELECTION FOR 13 BAR

A 13 bar compressor installation requires careful pressure-rating verification for every component exposed to compressed air.

Check the following before selecting accessories:

• Maximum allowable working pressure of the air receiver.
• Maximum operating pressure of the dryer and filters.
• Pressure ratings of automatic drains, valves and regulators.
• Working pressure of hoses, connectors and piping.
• Pressure-relief valve set pressure and certified capacity.
• Permissible pressure drop across treatment equipment.
• Required dew point and filtration grade.

A component rated only for a conventional 7–10 bar compressed air system must not automatically be used in a 13 bar installation.

The downstream pressure should also be regulated wherever connected machinery requires a lower pressure.

TECHNICAL SPECIFICATIONS

Model Number: SJ RF10

Product Type: Industrial Rotary Screw Air Compressor

Compressor Technology: Rotary Screw

Operating Technology: Fixed Speed

Compression Stage: Single Stage

Motor Power: 10 HP

Motor Rating: 7.5 kW

Maximum Operating Pressure: 13 bar(g)

Pressure Equivalent: 190 PSI(g)

Pressure Equivalent: 1.3 MPa(g)

Rated Airflow at 13 bar: 30 CFM

Rated Airflow at 13 bar: 0.85 m³/min

PRESSURE-WISE AIRFLOW REFERENCE

The official SJ specification sheet lists the following airflow values for the SJ RF10 at different pressure configurations:

• 8 bar: 46 CFM / 1.31 m³/min
• 10 bar: 34 CFM / 0.96 m³/min
• 13 bar: 30 CFM / 0.85 m³/min

IMPORTANT SPECIFICATION NOTE

For the SJ RF10 13 bar configuration, the applicable rated airflow is 30 CFM (0.85 m³/min).

The 8 bar and 10 bar airflow values belong to their respective pressure configurations. They must not be used as the rated airflow for the 13 bar model.

INDUSTRIAL APPLICATIONS

The SJ RF10 10 HP 13 bar fixed-speed screw air compressor is intended for evaluation in industrial applications where the machinery requires a higher compressed air pressure but the total airflow demand is relatively modest.

Its specified capacity of 30 CFM (0.85 m³/min) at 13 bar makes application-level selection particularly important.

The following industries and machinery categories identify potential applications. Actual suitability must be confirmed against the machine manufacturer's specified pressure and airflow requirements.

1. HIGH-PRESSURE PNEUMATIC CLAMPING SYSTEMS

Certain specialised manufacturing fixtures and machine assemblies use pneumatic clamping arrangements designed for higher operating pressure.

Potential applications include:
• Special-purpose machine clamping fixtures.
• Pneumatic work-holding systems.
• High-force pneumatic actuators.
• Dedicated assembly fixtures.
• Specialised industrial positioning equipment.
• Pneumatic locking and holding mechanisms.

The SJ RF10 can be evaluated where the connected pneumatic circuit requires up to 13 bar and its combined airflow consumption is within the available capacity.

2. SPECIAL-PURPOSE MACHINES AND INDUSTRIAL AUTOMATION

Special-purpose machines (SPM) frequently combine pneumatic cylinders, actuators, grippers, valves and automated positioning systems.

Some dedicated pneumatic circuits may require operating pressure above conventional factory compressed air levels.

Potential machinery includes:
• Special-purpose assembly machines.
• Automated component loading systems.
• Pneumatic positioning stations.
• Custom-built industrial automation equipment.
• Specialised pneumatic pressing auxiliaries.
• High-pressure pneumatic fixtures.
• Automated work-holding systems.

The actual pressure requirement must be verified at the machine connection. Higher pressure should not be assumed necessary for ordinary pneumatic automation.

3. INDUSTRIAL PNEUMATIC TESTING EQUIPMENT

Certain industrial test rigs use compressed air to operate actuators, control valves, pneumatic fixtures and dedicated testing mechanisms.

Potential applications include:
• Pneumatic actuator test benches.
• Valve actuation testing equipment.
• Pneumatic component functional testing.
• Specialised industrial test fixtures.
• Pneumatic leak-test equipment designed for the applicable pressure.
• Machine component testing arrangements.

Important: The SJ RF10 should only be considered where the test equipment is specifically designed for compressed air at the required pressure. It must not be treated as a universal solution for pressure-vessel proof testing or hydrostatic testing.

4. SPECIALISED CNC AND MACHINE TOOL AUXILIARIES

CNC machining centres, VMC machines, turning centres and other machine tools use compressed air for various auxiliary functions.

Potential applications include:
• Pneumatic workpiece clamping.
• Specialised machine fixtures.
• Pneumatic positioning mechanisms.
• Machine auxiliary actuators.
• Selected high-pressure pneumatic circuits.

Most conventional CNC and VMC machines do not require 13 bar compressed air for their standard pneumatic functions. The SJ RF10 is relevant only where the machine manufacturer's documentation specifies a compatible higher-pressure requirement.

5. INDUSTRIAL ASSEMBLY AND COMPONENT MANUFACTURING

Assembly facilities may use compressed air for component positioning, fixture operation, pneumatic locking and dedicated machine functions.

Potential machinery includes:
• Component assembly fixtures.
• Pneumatic locking systems.
• Automated assembly workstations.
• Specialised pneumatic actuators.
• Machine-mounted clamping units.
• Dedicated pneumatic assembly equipment.

The compressor should be selected using the combined airflow requirement of the connected equipment rather than the number of assembly stations alone.

6. PNEUMATIC ACTUATOR AND VALVE APPLICATIONS

Industrial actuators and valves can have different pressure requirements depending on their construction and operating specifications.

Potential applications include:
• Pneumatic actuator test benches.
• Specialised valve operating systems.
• Pneumatic valve assembly fixtures.
• High-pressure pneumatic control circuits.
• Dedicated actuator cycling equipment.

For process control applications, the compressor's suitability depends on the actuator manufacturer's specified pressure, consumption and air quality requirements.

7. INDUSTRIAL PACKAGING AND SPECIALISED PROCESS MACHINERY

Packaging and processing machinery can use compressed air for sealing, positioning, handling and pneumatic control.

Potential applications include:
• Specialised pneumatic sealing machinery.
• Automated packaging fixtures.
• Pneumatic positioning equipment.
• Dedicated machine operating circuits.
• Special-purpose packaging automation.

Conventional packaging machines generally operate at lower compressed air pressures. The SJ RF10 should be considered only for equipment that specifically requires a pressure compatible with its 13 bar rating.

8. INDUSTRIAL RESEARCH AND DEVELOPMENT LABORATORIES

Engineering laboratories and industrial R&D facilities may use compressed air for specialised equipment, pneumatic test benches and controlled experimental arrangements.

Potential applications include:
• Pneumatic component development rigs.
• Actuator performance testing.
• Specialised machine prototypes.
• Pneumatic control system evaluation.
• Laboratory automation equipment.

The required pressure, airflow, air quality and safety controls must be established for each test setup.

9. ENGINEERING WORKSHOPS WITH DEDICATED HIGH-PRESSURE EQUIPMENT

Some engineering workshops operate individual machines with pressure requirements higher than their general-purpose compressed air network.

The SJ RF10 can be evaluated as a dedicated compressor for such machinery where the connected load is within 30 CFM at 13 bar.

A separate regulated connection may be required for lower-pressure workshop equipment.

10. SPECIALISED INDUSTRIAL CLEANING AND PURGING EQUIPMENT

Selected industrial cleaning and purging arrangements use compressed air for equipment-specific functions.

Potential applications include:
• Pneumatic purging equipment.
• Specialised component cleaning machines.
• Machine cavity blow-off arrangements.
• Dedicated pneumatic cleaning fixtures.

The pressure and airflow must be checked against the equipment manufacturer's limits. Compressed air must not be used for cleaning operations where it creates unsafe dust dispersion or personnel exposure.

11. SMALL HIGH-PRESSURE PNEUMATIC PRODUCTION CELLS

Manufacturing facilities sometimes use a dedicated pneumatic circuit for one production cell rather than connecting every machine to a large central compressed air network.

The SJ RF10 can be evaluated for a production cell where:
• Required pressure is compatible with 13 bar operation.
• Combined airflow demand remains within 30 CFM.
• Simultaneous demand is properly assessed.
• The receiver and piping are correctly sized.
• Downstream equipment has appropriate pressure ratings.

This arrangement can be useful when a specialised machine has a different pressure requirement from the factory's main compressed air network.

12. SPECIALISED MACHINE BUILDERS AND OEM EQUIPMENT MANUFACTURERS

OEM machine builders may require a dedicated compressed air source for prototype testing, machine commissioning and equipment-specific pneumatic circuits.

Potential applications include:
• Special-purpose machine development.
• Pneumatic fixture manufacturing.
• Automated assembly equipment.
• Industrial actuator test rigs.
• Custom-built pneumatic machinery.

The SJ RF10 can be assessed for these applications after checking the machine's specified pressure and total air consumption.

APPLICATION SELECTION: IMPORTANT ENGINEERING CHECK

The SJ RF10 is rated at 30 CFM at 13 bar. This airflow is the key selection parameter for evaluating the connected machinery.

Before recommending the compressor, establish:

• Actual operating pressure required by the machinery.
• Air consumption of each connected pneumatic device.
• Simultaneous operating demand.
• Peak airflow requirement.
• Leakage allowance.
• Pressure loss through filters, dryer and piping.
• Required air receiver volume.
• Required compressed air quality.
• Whether the connected equipment is designed for 13 bar operation.

If the machinery requires substantially more than 30 CFM at 13 bar, the SJ RF10 is not the correct capacity for that demand.

COMPATIBLE ACCESSORIES

The SJ RF10 can be integrated with suitable high-pressure compressed air storage, treatment and distribution equipment.

Compatible accessories include:

• High-Pressure Air Receiver Tank – Stores compressed air and supports short-duration demand fluctuations.
• Refrigerated Air Dryer – Reduces moisture content for general industrial compressed air.
• Desiccant Air Dryer – Provides lower pressure dew point air where required.
• Moisture Separator – Removes bulk liquid moisture.
• Pre-Filter – Removes larger particles and liquid contaminants.
• After-Filter – Provides additional downstream filtration.
• Micro Filter – Supports finer aerosol filtration requirements.
• Activated Carbon Filter – Helps reduce oil vapour and odour.
• Automatic Drain Valve – Removes accumulated condensate from compatible system components.
• Pressure Regulator – Controls downstream pressure for equipment operating below 13 bar.
• Pressure Gauge – Provides local pressure indication.
• Safety Relief Valve – Protects the relevant pressure vessel or system section when correctly selected and installed.
• High-Pressure Air Piping – Distributes compressed air through a suitable pressure-rated network.
• Oil-Water Separator – Treats oil-contaminated condensate before disposal.
• Airflow Meter – Measures compressed air consumption.
• Dew Point Monitor – Monitors moisture performance of treated compressed air.

ACCESSORY SIZING AND SYSTEM DESIGN

For the SJ RF10, accessory selection should be based on 30 CFM at 13 bar, not the airflow value at 8 bar or 10 bar.

The following engineering checks are important:

• Dryer rated capacity at the actual operating pressure and inlet conditions.
• Filter flow capacity and pressure drop.
• Air receiver pressure rating and required storage volume.
• Piping and fitting pressure ratings.
• Pressure regulator capacity and downstream pressure requirement.
• Safety valve selection and pressure-vessel compliance.
• Condensate drain compatibility with the system pressure.

The complete compressed air system must be designed as a pressure-rated installation, not simply assembled from standard 8 bar accessories.

FREQUENTLY ASKED QUESTIONS

Q1. What is the motor capacity of the SJ RF10 13 bar screw compressor?

The SJ RF10 has a motor power rating of 10 HP, equivalent to 7.5 kW.

Q2. What is the airflow capacity of the SJ RF10 at 13 bar?

The specified airflow is 30 CFM, equivalent to 0.85 m³/min, at 13 bar operating pressure.

Q3. Is the SJ RF10 a fixed-speed or VFD compressor?

The SJ RF10 is a fixed-speed rotary screw air compressor. Its motor operates at its designed operating speed during loaded operation. Compressor capacity regulation is managed through the supplied control arrangement.

Q4. Can the SJ RF10 be used for CNC and VMC machines?

It can be considered for specialised CNC or VMC applications where the machine manufacturer specifies a compatible 13 bar pneumatic requirement and the total airflow demand is within 30 CFM.

Most standard CNC and VMC machines do not require 13 bar for their normal pneumatic functions. The machine specification must be checked before selection.

Q5. Can the SJ RF10 operate pneumatic testing equipment?

It can be evaluated for testing equipment designed to use compressed air at a pressure compatible with the compressor's 13 bar rating.

The compressor should not be selected for a testing application without checking the test medium, equipment pressure rating, safety provisions and required airflow.

Q6. Can the SJ RF10 supply multiple pneumatic machines?

Yes, provided the combined simultaneous airflow demand remains within the compressor's rated capacity of 30 CFM at 13 bar.

The air receiver, pressure losses, peak demand and downstream pressure requirements must also be considered.

Q7. Can I connect a normal 8 bar air receiver tank to a 13 bar compressor?

Not unless the receiver is specifically rated and approved for the intended operating pressure.

The receiver's maximum allowable working pressure, certification, safety valve and applicable statutory requirements must be verified before installation.

Q8. Can a 13 bar compressor supply machinery operating at 7 or 8 bar?

Yes. A properly designed pressure regulator can reduce the downstream pressure to the machinery's required operating level.

The regulator, piping and other system components must have suitable pressure ratings and adequate flow capacity.

Q9. Does the SJ RF10 deliver 46 CFM at 13 bar?

No. According to the official SJ specification sheet:

• At 8 bar: 46 CFM.
• At 10 bar: 34 CFM.
• At 13 bar: 30 CFM.

For the SJ RF10 13 bar configuration, the applicable rated airflow is 30 CFM.

Q10. Which air dryer should be selected for the SJ RF10?

The dryer should be selected according to the actual airflow of 30 CFM at the specified operating pressure, together with inlet temperature, ambient conditions, required pressure dew point and permissible pressure drop.

A dryer should not be selected using only the compressor's 10 HP motor rating.

Q11. What maintenance is required for the SJ RF10?

Maintenance generally includes inspection and servicing of the air intake filter, lubricating oil, oil filter, air-oil separator, cooling system and electrical connections according to the manufacturer's maintenance schedule.

The actual service intervals should follow the approved service documentation and operating conditions.

Q12. Is the SJ RF10 suitable for every 13 bar industrial application?

No. The compressor provides 30 CFM at 13 bar. Applications requiring higher airflow cannot be adequately served simply because their pressure requirement is 13 bar.

Both operating pressure and airflow demand must be within the compressor's capability.

WHY CHOOSE SARV JAGAT?

Sarv Jagat Corporation provides industrial compressed air solutions for manufacturing facilities, engineering companies, OEM machine builders and process industries.

The SJ RF10 is part of Sarv Jagat's fixed-speed rotary screw compressor range, intended for applications evaluating a 10 HP compressor with a specified airflow of 30 CFM at 13 bar.

REASONS TO CONSIDER SARV JAGAT

• Industrial Screw Compressor Range: Multiple motor capacities, pressure configurations and airflow options.
• Fixed-Speed Compressor Technology: Suitable for applications with reasonably predictable compressed air demand.
• Higher-Pressure Applications: Compressor options for machinery requiring pressure above conventional 7–8 bar systems.
• Technical Selection Support: Assistance in evaluating compressor capacity, operating pressure and application requirements.
• Compressed Air Treatment: Integration options for air receivers, dryers, filters and moisture separators.
• Spare Parts Support: Assistance with compatible compressor maintenance components, subject to model and configuration.
• Service Support: Compressor maintenance and troubleshooting support.
• Industrial Application Knowledge: Support in evaluating compressed air requirements for machinery and manufacturing processes.
• Ahmedabad-Based Business: Sarv Jagat Corporation operates from Ahmedabad, Gujarat, India.

For SJ RF10 pricing, technical specifications, installation requirements, optional accessories and a customised compressed air system quotation, contact Sarv Jagat Corporation.

SARV JAGAT – INDUSTRIAL SCREW AIR COMPRESSORS, COMPRESSED AIR SOLUTIONS, SPARES & SERVICE.
Complementary Equipment

Related Industrial Screw Compressors

View All 84 Models
SJ RF 10Fixed
10 HP 8 Bar SJ Fixed Speed Screw Air Compressor
⚙️ Fixed Speed Drive

10 HP 8 Bar SJ Fixed Speed Screw Air Compressor

Buy 10 HP 8 Bar Fixed Speed Screw Air Compressor from Sarv Jagat. Delivers 45 CFM with reliable rotary screw technology, energy efficient & Low maintenance.

Power10 HP7.5 kW
Pressure8 Bar116 PSI
Air Delivery45 CFM1.27 m³/m
View Details
SJ RF 20Fixed
20 HP 8 Bar SJ Fixed Speed Screw Air Compressor
⚙️ Fixed Speed Drive

20 HP 8 Bar SJ Fixed Speed Screw Air Compressor

Buy SJ RF20 20 HP 8 Bar Fixed Speed Screw Air Compressor. 85 CFM (2.41 m³/min), oil injected rotary screw technology for industrial use.

Power20 HP15 kW
Pressure8 Bar115 PSI
Air Delivery85 CFM2.41 m³/m
View Details
SJ RF 30Fixed
30 HP 8 Bar SJ Fixed Speed Screw Air Compressor
⚙️ Fixed Speed Drive

30 HP 8 Bar SJ Fixed Speed Screw Air Compressor

Buy SJ RF30 30 HP 8 Bar Fixed Speed Screw Air Compressor. 134 CFM (3.79 m³/min), oil injected rotary screw technology for industrial applications.

Power30 HP22 kW
Pressure8 Bar115 PSI
Air Delivery134 CFM3.79 m³/m
View Details
Call
WhatsApp
Products
Get Quote